Effect of Nanosilica on Mechanical and Microstructural Properties of Cement Mortar
نویسندگان
چکیده
Recently, nanomaterials (such as nanosilica) are receiving special attention because of their ability to improve the performance of concrete compared with traditional mineral admixtures. In this work, a number of specimens were prepared to study the behavior of cement mortar containing nanosilica. The cement replacement by nanosilica of 3% and 5% by weight of cement was used. The mechanical and microstructural properties of the specimens were investigated. An experimental result from literature was utilized to predict the transport of chloride into reinforced concrete structures modified with nanosilica using COMSOL multiphysics commercial package. The experimental results show that cement mortars containing nanosilica have higher strength than ordinary portland cement mortars. Also, the SEM images confirmed the improvement in the microstructure of mortar with nanosilica.
منابع مشابه
ThE EFFECT OF METAKOLIN, MICROSILICA AND NANOSILICA ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF CEMENT MORTAR
Different mineral admixtures of Indian metakaolin, Iranian silica fume and nanosilica were used to produce high performance mortars. Two different sands types with grain size of 0.015-4mm were mixed with type II Portland cement, polycarboxylate superplasticizer,mineral admixture with 650kg/m3 cement content and water/cement ratio of 0.35. Different amount of cement was replaced by metakaolin or...
متن کاملInfluential Mechanisms and Potential Applications of Nano-Silicas in Cement Composites
Nanosilicas have been known as super-pozzolanic materials and compared to silica fume, these materials have higher purity of silica and finer particles. However, in contrast to silica fume, nanosilicas are produced by various methods, leading to different morphologies and agglomeration statuses in their initial form. On the other hand, due to several mechanisms such as the bridging effect of ca...
متن کاملThe Influence of Graphene Oxide on Mechanical Properties and Durability Increase of Concrete Pavement
Herein, the performance of graphene oxide (GO) in improving mechanical properties and subsequently reducing the permeability of cement composites used in concrete pavement, is studied. A polycarboxylate superplasticizer was used to improve the dispersion of GO flakes in the cement. The mechanical strength of graphene-cement nanocomposites containing 0.1–2 wt% GO and 0.5 wt% superplasticizer was...
متن کاملPhysico-Mechanical Properties of Organo-Modified Bentonite Reinforced Cement Mortars
It is demonstrated that the addition of organo-modified Na-bentonite (OMB) particles to Portland cement mortar can promote its physical and mechanical properties. A series of experimental works on some important physico-mechanical properties of Portland cement mortars mixed with various dosages of hydrophobic OMB were performed. The obtained results confirm that the OMB provides a dense packing...
متن کاملEffects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar
Natural and artificial materials including rocks and cement-based materials such as concrete and cement mortar are affected both physically and chemically by various natural factors known as weathering factors. The freeze-thaw process, as a weathering factor, considerably affects the properties of rocks and concrete. Therefore, the effect of the freeze-thaw process on the physical and mechanica...
متن کامل