Evaluation and Reliability Assessment of GaN-on-Si MIS-HEMT for Power Switching Applications
نویسندگان
چکیده
This paper reports an extensive analysis of the physical mechanisms responsible for the failure of GaN-based metal–insulator–semiconductor (MIS) high electron mobility transistors (HEMTs). When stressed under high applied electric fields, the traps at the dielectric/III-N barrier interface and inside the III-N barrier cause an increase in dynamic on-resistance and a shift of threshold voltage, which might affect the long term stability of these devices. More detailed investigations are needed to identify epitaxyor process-related degradation mechanisms and to understand their impact on electrical properties. The present paper proposes a suitable methodology to characterize the degradation and failure mechanisms of GaN MIS-HEMTs subjected to stress under various off-state conditions. There are three major stress conditions that include: VDS = 0 V, off, and off (cascode-connection) states. Changes of direct current (DC) figures of merit in voltage step-stress experiments are measured, statistics are studied, and correlations are investigated. Hot electron stress produces permanent change which can be attributed to charge trapping phenomena and the generation of deep levels or interface states. The simultaneous generation of interface (and/or bulk) and buffer traps can account for the observed degradation modes and mechanisms. These findings provide several critical characteristics to evaluate the electrical reliability of GaN MIS-HEMTs which are borne out by step-stress experiments.
منابع مشابه
Design of X Band High Power Amplifier MMIC Based on AlGaN/GaN HEMT
In this paper, we have presented an X band high power amplifier based on MMIC (Monolithic Microwave Integrated Circuit) technology for satellite remote sensing systems. We have used GaN HEMT process with 500 nm gate length technology with VD= 40 V and VG= -2 V in class E structure. The proposed two-stage power amplifier provides 25 dB power gain with maximum output power of 49.3 dBm at 10 GHz. ...
متن کاملA gold-free fully copper metalized AlGaN/GaN power HEMTs on Si substrate
The thermal stability and reliability of AlGaN/GaN high electron mobility transistors (HEMTs) on Si substrates with a 2 μm-thick copper interconnection (Cu-INTC) metal were evaluated. The use of metallic copper as a conducting metal has the advantages of higher thermal conductivity, low cost and low sheet resistance. For comparison, traditional gold metal interconnection (Au-INTC) devices were ...
متن کاملGaN HEMT Amplifier for C-band Space Applications
1. Introduction With the diversifying functions and increasing traffic of recent satellite communications, the amplifiers installed in satellites must provide higher power and improved efficiency. Commonly-used satellite-mounted amplifiers are, in general, either traveling wave tube amplifiers (TWTAs) or solid state power amplifiers (SSPAs) using gallium arsenide field-effect transistors (GaAs ...
متن کاملA comprehensive methodology to qualify the reliability of GaN products
A comprehensive methodology to qualify the reliability of GaN products 2 Introduction The industry takes the reliability of silicon power transistors for granted due to over thirty years of experience and continuous improvement. This longstanding experience has resulted in a mature qualification methodology, whereby reliability and quality are certified by running standardized tests. These test...
متن کاملHigh-Frequency, GaN Diode-Free Motor Drive Inverter with Pure Sine Wave Output
Silicon-based power switching devices have improved dramatically since their inception decades ago. An impressive example: Si super-junction MOSFETs, such as CoolMOS FETs, broke the theoretical Si limit in the tradeoff between blocking voltage and resistance (Ref. 1). However, the large amount of minority charge in the body diode results in large reverse recovery losses in hardswitched bridge c...
متن کامل