Growth and Characterization of Jet Nebulizer Spray Deposited n-type WO3 thin films for Junction Diode Application
نویسنده
چکیده
The n-type tungsten oxide (WO 3 ) polycrystalline thin films have been prepared at an optimized parameters (0.20M, 5 ml and 500oC) using jet nebulizer spray pyrolysis (JNSP) technique. Such prepared WO 3 films were characterized by XRD, SEM, EDAX, UV-vis from I-V. The XRD pattern of the optimized WO 3 film reveals the monoclinic structure. The SEM and EDAX images shows that the surface morphological variations and elements present were confirmed. The optical properties were recorded by UV-vis spectrum and the maximum band gap value was observed as 3.86 eV for 500°C. The maximum conductivity of the prepared WO 3 was recorded as 1.201 x 10-8S/cm from I-V characterization for 500°C.Using J-V plot, the diode parameters of n-WO 3 /p-Si prepared at 500°C with 0.2 M and 5 ml were measured under dark and illumination. The ideality factor (n) and barrier height (Φ b ) values of n-WO 3 /p-Si diode are obtained as 5.8 and 0.80 eV in dark and 3.9 and 0.81 eV under illumination.
منابع مشابه
Studies on Structural and Optical Characterization of In-Zn-S Ternary Thin Films Prepared by Spray Pyrolysis
Thin films of indium doped zinc sulfide (ZnS) for different indium (In) concentrations (x=0.0 - 0.8) were deposited onto glass substrate by spray pyrolysis method at 523K temperature. Aqueous solution of zinc acetate, indium chloride and thiorea were used to deposit the In-Zn-S film. The deposited thin films were characterized by Energy dispersive X-ray (EDX), Scanning electron microscopy (SEM)...
متن کاملPreparation and Characterization of Aluminum Nitride Thin Films with the Potential Application in Electro-Acoustic Devices
In this work, aluminum nitride (AlN) thin films with different thicknesses were deposited on quartz and silicon substrates using single ion beam sputtering technique. The physical and chemical properties of prepared films were investigated by different characterization technique. X-ray diffraction (XRD) spectra revealed that all of the deposited films have an amorphous str...
متن کاملEnhanced methanol sensing performance of oblique deposited WO3 thin films
Methanol (CH3OH) is a colorless liquid with a mild odor. The wide ranges of applications, toxicity and clinical implications of methanol have made necessary to develop reliable and high-performance methanol sensors. In this paper, WO3 thin films were deposited on SiO2/Si substrates by e-beam evaporation technique under normal and oblique angles and then post-annealed at 500 °C with a flow of ox...
متن کاملPreparation and growth of SnS thin film deposited by spray pyrolysis technique
In this paper thin films of tin sulfide (SnS) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. In this work the characteristic of SnS thin films investigated. The XRD pattern and optical transmittance of thin films also are discussed. With the change in concen...
متن کاملHRTEM Microstructural Characterization of β-WO3 Thin Films Deposited by Reactive RF Magnetron Sputtering
Though tungsten trioxide (WO3) in bulk, nanosphere, and thin film samples has been extensively studied, few studies have been dedicated to the crystallographic structure of WO3 thin films. In this work, the evolution from amorphous WO3 thin films to crystalline WO3 thin films is discussed. WO3 thin films were fabricated on silicon substrates (Si/SiO2) by RF reactive magnetron sputtering. Once a...
متن کامل