Dynamic Modelling for MEMS-IMU/Magnetometer Integrated Attitude and Heading Reference System

نویسندگان

  • Wei Li
  • Jinling Wang
چکیده

Wei Li (1) 1. School of Electronics and Information/Northwestern Polytechnical University/China 2. School of Surveying and Spatial Information Systems/ University of New South wales/Australia Phone: 61404086982, [email protected] Jinling Wang (2) School of Surveying and Spatial Information Systems/ University of New South wales/Australia Phone: 61400463668, [email protected] Zhanrong Jing (3) School of Electronics and Information/Northwestern Polytechnical University/China Phone: +86 029 88492094, [email protected]

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Magnetic Calibration of Three-Axis Strapdown Magnetometers for Applications in Mems Attitude-Heading Reference Systems

In a strapdown magnetic compass, heading angle is estimated using the Earth's magnetic field measured by Three-Axis Magnetometers (TAM). However, due to several inevitable errors in the magnetic system, such as sensitivity errors, non-orthogonal and misalignment errors, hard iron and soft iron errors, measurement noises and local magnetic fields, there are large error between the magnetometers'...

متن کامل

Coupled GPS/MEMS IMU Attitude Determination of Small UAVs with COTS

This paper proposes an attitude determination system for small Unmanned Aerial Vehicles (UAV) with a weight limit of 5 kg and a small footprint of 0.5 m×0.5 m. The system is realized by coupling single-frequency Global Positioning System (GPS) code and carrier-phase measurements with the data acquired from a Micro-Electro-Mechanical System (MEMS) Inertial Measurement Unit (IMU) using consumer-g...

متن کامل

FAA Certification of a MEMS Attitude and Heading Reference System

Elecia White has been a software engineer at Crossbow Technology, Inc., San Jose, CA since January 2000. Her responsibilities include firmware architecture, development and hardware integration for the IMU product line. She is the primary point of contact for Crossbow’s software certification effort. Before Crossbow, Elecia spent five years as software engineer and technical lead at Hewlett-Pac...

متن کامل

Implementing quaternion based AHRS on a MEMS multisensor hardware platform

Over the last decade or so micro-electromechanical system (MEMS) technology has been widely used in many navigation applications such as pedestrians, aircraft, land vehicles and robots, because of its advantages in terms of price, accuracy and size. This paper presents a novel low-cost multisensor hardware platform known as “NAVCON”, which is designed for navigation and control of quad-rotor un...

متن کامل

Calibrated MEMS inertial sensors with GPS for a precise attitude heading reference system on autonomous farming tractors

GNSS/INS (Global Navigation Satellite System/Inertial Navigation System) systems have found widespread usage in industry and especially in automated agriculture. These systems produce a high frequency attitude solution for mobile agents. The mojoRTK, an agricultural product from Leica Geosystems, is based around a GPS/INS system, utilizing a survey-grade L1/L2 GPS/GLONASS antenna in addition to...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011