A splats obtaining system for thermal spray deposits
نویسندگان
چکیده
The image of thermal spray splats is difficult to collect due to its high velocity of droplets. Especial in High Velocity Oxy-Fuel (HVOF) process, the process present higher velocity of flame jet correlated to other thermal spray process. The system presents at this article describes a useful splats catching method to obtaining splats during thermal spray deposited. Capabilities and advantages of using this instrument are declared at this theme. The final result presented the instrument caught the single spot of HVOF sprayed splats at sub-micro second. Splats of spot were dispersed well on the glass substrate at the obtaining system, and presented various information of droplets impact at different location on the substrate.
منابع مشابه
Spreading Behavior and Morphology of Ethylene Methacrylic Acid (EMAA) Deposits via the Flame Spray Process
A single splat is the building block of a thermal spray coating; thus, investigating single splats is essential to understanding thermal spray coatings and their properties. In this study, the spreading behavior and the morphology of flame sprayed ethylene methacrylic acid (EMAA) splats, deposited at various stand-off distances (SODs) onto glass and mild steel substrates were investigated using...
متن کاملRole of Lamellae Morphology on the Microstructural Development and Mechanical Properties of Small-Particle Plasma-Sprayed Alumina
The influence of spray parameters on the microstructure and flexural strength of plasma-sprayed alumina was investigated. Coatings were applied using a small-particle plasma spray (SPPS) method, which is a recently patented process that allows submicrometer-sized powders to be sprayed. Using identical starting powders, coatings that were produced using two distinctly different spray conditions ...
متن کاملOsteoclast resorption of thermal spray hydoxyapatite coatings is influenced by surface topography.
Coating characteristics such as composition, crystallite features and topography collectively impact the cell response. The influence from splats has not yet been assessed for hydroxyapatite (HAp) thermal spray coatings. The objective of this work is to (a) survey the topography on commercial implants, (b) ascertain topography formation from single splats, and (c) determine the osteoclast resor...
متن کاملModeling of splat particle splashing data during thermal spraying with the Burr distribution
Splashing of splat particles is one of the most important phenomena in industrial processes such as thermal spray coating. The data relative to the degree of splashing of splats sprayed with a normal angle are commonly characterized by the Weibull distribution function. In this present study, an effort has been made to show that the Burr distribution is better than the Weibull distribution for ...
متن کاملEthylene Methacrylic Acid (EMAA) Single Splat Morphology
A single splat is the building block of a thermal spray coating; thus, investigating single splats is essential to understanding thermal spray coatings and their properties. In this study, the morphology of flame sprayed ethylene methacrylic acid (EMAA) splats, deposited at various stand-off distances (SODs) onto glass and mild steel substrates were investigated using a scanning electron micros...
متن کامل