Numerical Simulation of Minimum Distance Jet Impingement Heat Transfer
ثبت نشده
چکیده
Impinging jets are used in various in cooling and drying technique. The current research the means of improving the heat transfer for con minimum distance of the nozzle to the impingem impingement heat transfer is described using nume a wide range of parameters for an array of p parameters include varying jet flow speed, width o of nozzle, angle of the jet flow, velocity and impingement surface. Normal pressure and shear s as additional parameters. Using dimensionless char the parameters and the results are correlated to equations. The results demonstrate the effect o parameters on the flow. Keywords—Heat Transfer Coefficient, Mini impingement, Numerical simulation, Dimensionles
منابع مشابه
Thermal Performance of Jet Impingement with Spent Flow Management
The present study proposes novel micro-jet impingement heat sink with effusion holes for flow extraction. The design consists of impingement nozzles surrounded by multiple effusion holes to take away the spent fluid. A three-dimensional numerical model is used for steady, incompressible, laminar flow and conjugate heat transfer for the performance analysis of the proposed design. The computatio...
متن کاملApplying a full implicit finite-difference method in jet impingement heat transfer studies
Jet impingement heat transfer is an effective and practical approach that is employed in many industrial processes where heating, cooling, or drying is required. Details of the heat or mass transfer rate have been investigated both experimentally and numerically and can be found in the published literature. In most of the numerical studies, control-volume approach has been employed to solve the...
متن کاملNumerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders
A numerical study has been carried out for slot air jet impingement cooling of horizontal concentric circular cylinders. The slot air jet is situated at the symmetry line of a horizontal cylinder along the gravity vector and impinges on the bottom of the outer cylinder which is designated as θ=0°. The outer cylinder is partially opened at the top with a width of W=30mm and is kept at constant t...
متن کاملEffect of Injection Parameters on Jet Array Impingement Heat Transfer
The purpose of the present study is to clarify the heat transfer characteristics with multiple jet impingement aiming at the highly efficient cooling performance. In the study, we investigated the effect of injection parameters on circular jet array impingement heat transfer. As we focus on interference among the adjacent impinging jets, tests are mainly conducted at the minimum crossflow condi...
متن کاملExperimental study and numerical simulation of three dimensional two phase impinging jet flow using anisotropic turbulence model
Hydrodynamic of a turbulent impinging jet on a flat plate has been studied experimentally and numerically. Experiments were conducted for the Reynolds number range of 72000 to 102000 and a fixed jet-to-plate dimensionless distance of H/d=3.5. Based on the experimental setup, a multi-phase numerical model was simulated to predict flow properties of impinging jets using two turbulent models. Mesh...
متن کامل