Effects of pressure and precursor loading in the flame synthesis of titania nanoparticles
نویسندگان
چکیده
Article history: Received 29 May 2007 Received in revised form 25 July 2009 Accepted 28 July 2009
منابع مشابه
Facile Fabrication of Boron-Doped Titania Nanopowders by Atmospheric Pressure Chemical Vapor Synthesis Route and its Photocatalytic Activity
The Atmospheric Pressure Chemical Vapor Synthesis (APCVS) route is a process that can be used for the synthesis of doped-nanocrystalline powders with very small crystallite sizes having a narrow particle size distribution and high purity. In this study, APCVS technique was used to prepare boron-doped titania nanopowders. The effects of temperature, borate flow rate and water flow rate on the am...
متن کاملSynthesis of Nano-Sized Titania Particles by Hydrolysis of Titanium Tetrachloride
Nano-sized titanium dioxide TiO2 powder was successfully prepared from its precursor titanium (IV) chloride by a simple and new wet chemical method. TiCl4 were used as precursor in hydrogen peroxide, H2O2 and ethanol. This solution was then peptized using nitric acid and heated under reflux at 80°C. Their physico-chemical properties were then characterized by transmission electron microscopy (T...
متن کاملSynthesis of Nano-Sized Titania Particles by Hydrolysis of Titanium Tetrachloride
Nano-sized titanium dioxide TiO2 powder was successfully prepared from its precursor titanium (IV) chloride by a simple and new wet chemical method. TiCl4 were used as precursor in hydrogen peroxide, H2O2 and ethanol. This solution was then peptized using nitric acid and heated under reflux at 80°C. Their physico-chemical properties were then characterized by transmission electron microscopy (T...
متن کاملControl of nanoparticle size and agglomeration through electric-field-enhanced flame synthesis
The isolated study of electrophoretic transport of nanoparticles (that are innately charged through thermionic emission), with no ionic wind, has been conducted under uniform electric fields. Titania nanoparticles are produced using a burner-supported low-pressure premixed flame in a stagnation-point geometry from corresponding organometallic vapor precursor. The material processing flow field ...
متن کاملSynthesis of TiO2-CuO mesoporous composite nanoparticles by sol-gel method and evaluation of structural, optical and photocatalytic properties
Given the growing importance of photocatalysts in the industrial wastewater treatment, in this study, TiO2-CuO (TC) composite nanoparticles were synthesized by sol-gel method. Tetrabutyl orthotitanate (TBT), copper nitrate-3hydrate and ethanol were used as titanium dioxide precursor, copper oxide precursor and solvent, respectively. The structural, optical, photocatalytic activity and BET-BJH...
متن کامل