Design and Analysis of Low Power Full Adder Using Adiabatic Technique
نویسندگان
چکیده
The energy stored at the output can be retrieved by the reversing the current source direction discharging process instead of dissipation in NMOS network. Hence adiabatic switching offers the less energy dissipation in PMOS network and reuse the stored energy in the output capacitance by reversing the current source direction. There are the many adiabatic logic design technique are given in Literature but here two of them are chosen ECRL and PFAL, which shows the good improvement in energy dissipation and are mostly used as reference in new logic families for less energy dissipation reduction of area & power factors the simulations were done using microwind & DSCH results
منابع مشابه
Design and Analysis of Conventional CMOS and Energy Efficient Adiabatic Logic for Low Power VLSI Application
In recent years, low power circuit design has been an important issue in VLSI design areas. Adiabatic logics, which dissipate less power than static CMOS logic, have been introduced as a promising new approach in low power circuit design. energy. This paper proposes an Adder circuit based on energy efficient two-phase clocked adiabatic logic. A simulative investigation on the proposed 1-bit ful...
متن کاملLow-Power Adder Design for Nano-Scale CMOS
A fast low-power 1-bit full adder circuit suitable for nano-scale CMOS implementation is presented. Out of the three modules in a common full-adder circuit, we have replaced one with a new design, and optimized another one, all with the goal to reduce the static power consumption. The design has been simulated and evaluated using the 65 nm PTM models.
متن کاملA Low Power Full Adder Cell based on Carbon Nanotube FET for Arithmetic Units
In this paper, a full adder cell based on majority function using Carbon-Nanotube Field-Effect Transistor (CNFET) technology is presented. CNFETs possess considerable features that lead to their wide usage in digital circuits design. For the design of the cell input capacitors and inverters are used. These kinds of design method cause a high degree of regularity and simplicity. The proposed des...
متن کاملComparative Analysis of Conventional CMOS and Energy Efficient Adiabatic Logic Circuits
-In recent years, low power circuit design has been an important issue in System on Chip (SoC) and VLSI design areas. Adiabatic logics, which dissipate less power than static CMOS logic, have been introduced as a promising new approach in low power circuit design. Adiabatic circuits are those circuits which work on the principle of adiabatic charging and discharging and which recycle the energy...
متن کاملLow Power Full Adder Circuit Design Using Two Phase Adiabatic Static CMOS Logic
Adiabatic logic is used to minimize the energy loss during operation of the circuit. Using two-phase adiabatic static CMOS logic (2PASCL) the power consumption can be reduced. This paper compares the power consumption of Static Energy Recovery Full Adder(SERF) and the proposed full adder using two phase adiabatic static CMOS logic(2PASCL). The average power consumption of proposed full adder is...
متن کاملDesigning of Full Adder Circuits for Low Power
Full adders are important components in applications such as digital signal processing (DSP) architecture, and microprocessors. Over the past decade, several adiabatic logic styles have been reported. This paper deals with the design of a 1-bit full adder using adiabatic logic style (DTGAL), which are derived from static CMOS logic, without a large change. This paper also proposes a new design ...
متن کامل