Design and Test Research on Cutting Blade of Corn Harvester Based on Bionic Principle
نویسندگان
چکیده
Existing corn harvester cutting blades have problems associated with large cutting resistance, high energy consumption, and poor cut quality. Using bionics principles, a bionic blade was designed by extracting the cutting tooth profile curve of the B. horsfieldi palate. Using a double-blade cutting device testing system, a single stalk cutting performance contrast test for corn stalks obtained at harvest time was carried out. Results show that bionic blades have superior performance, demonstrated by strong cutting ability and good cut quality. Using statistical analysis of two groups of cutting test data, the average cutting force and cutting energy of bionic blades and ordinary blades were obtained as 480.24 N and 551.31 N and 3.91 J and 4.38 J, respectively. Average maximum cutting force and cutting energy consumption for the bionic blade were reduced by 12.89% and 10.73%, respectively. Variance analysis showed that both blade types had a significant effect on maximum cutting energy and cutting energy required to cut a corn stalk. This demonstrates that bionic blades have better cutting force and energy consumption reduction performance than ordinary blades.
منابع مشابه
Simulation and Experiment on Conveying Device of Cutting System of Small Sugarcane Harvester (RESEARCH NOTE)
The main problem is less efficiency and blocking during sugarcane harvesting in hilly areas. This paper researched the cutting and transporting system of a small sugarcane harvester using virtual prototype technology. The dynamics simulation analyses were carried out to study the transporting status with different friction coefficients between the sugarcane and the spiral and different numbers ...
متن کاملDesign and Analysis of Bionic Cutting Blades Using Finite Element Method
Praying mantis is one of the most efficient predators in insect world, which has a pair of powerful tools, two sharp and strong forelegs. Its femur and tibia are both armed with a double row of strong spines along their posterior edges which can firmly grasp the prey, when the femur and tibia fold on each other in capturing. These spines are so sharp that they can easily and quickly cut into th...
متن کاملDesign, Development and Testing of Low Capital and Operational Cost Shrub Cutting Machine
The machine to be designed and developed with a view to resolve one ofthe irksome problems of this institute has been facing every year. This institute issurrounded by vast non- fertile land area of about 200 acres, which becomes widelyoccupied by numerous breads of bushes and shrubs during post-rainy season. Due tothis unwanted proliferation of such verdant institute gets abysmal look and that...
متن کاملBionic Design of Wind Turbine Blade Based on Long-Eared Owl's Airfoil
The main purpose of this paper is to demonstrate a bionic design for the airfoil of wind turbines inspired by the morphology of Long-eared Owl's wings. Glauert Model was adopted to design the standard blade and the bionic blade, respectively. Numerical analysis method was utilized to study the aerodynamic characteristics of the airfoils as well as the blades. Results show that the bionic airfoi...
متن کاملEnergy Requirement for Cutting Corn Stalks (Single Cross 704 Var.)
Corn is cultivated in most countries because of high consumption, quality, and food value. This study evaluated needed energy for cutting corn stems in different levels of cutting height and moisture content. For this reason, test device was fabricated and then calibrated. The device works on the principle of conservation of energy. The results were analyzed using split plot design and SAS soft...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2017 شماره
صفحات -
تاریخ انتشار 2017