Hydrothermal-Assisted Sintering Strategy Towards Porous- and Hollow-Structured LiNb3O8 Anode Material

نویسندگان

  • Haifa Zhai
  • Hairui Liu
  • Hongjing Li
  • Liuyang Zheng
  • Chunjie Hu
  • Xiang Zhang
  • Qiling Li
  • Jien Yang
چکیده

Porous- and hollow-structured LiNb3O8 anode material was prepared by a hydrothermal-assisted sintering strategy for the first time. The phase evolution was studied, and the formation mechanism of the porous and hollow structure was proposed. The formation of the unique structure can be attributed to the local existence of liquid phase because of the volatilization of Li element. As the anode material, the initial discharge capacity is 285.1 mAhg-1 at 0.1 C, the largest discharge capacity reported so far for LiNb3O8. Even after 50 cycles, the reversible capacity can still maintain 77.6 mAhg-1 at 0.1 C, about 2.5 times of that of LiNb3O8 samples prepared by traditional solid-state methods. The significant improvement of Li storage capacity can be attributed to the special porous and hollow structure, which provides a high density of active sites and short parallel channels for fast intercalation of Li+ ions through the surface.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation and Photocatalytic Performance of Hollow Structure LiNb3O8 Photocatalysts

Hollow structure LiNb3O8 photocatalysts were prepared by a hydrothermal method assisting sintering process. The particles' aggregation to form hollow structures with obvious cavities can be attributed to the Li element volatilization during calcination process. All the LiNb3O8 powders show high photocatalytic efficiency of degradation of methylene blue (MB), especially for the sample calcined a...

متن کامل

The Effects of Li/Nb Ratio on the Preparation and Photocatalytic Performance of Li-Nb-O Compounds

The effects of Li/Nb ratio on the preparation of Li-Nb-O compounds by a hydrothermal method were studied deeply. Li/Nb ratio has a great impact on the formation of LiNbO3; the ratio smaller than 3:1 is beneficial to the formation of LiNbO3, while larger than 3:1, forms no LiNbO3 at all and the morphology and chemical bond of Nb2O5 raw material are totally modified by Li ions. The reason can be ...

متن کامل

Microwave-assisted hydrothermal synthesis of Cu/Cu2O hollow spheres with enhanced photocatalytic and gas sensing activities at room temperature.

Cu/Cu2O nano-heterostructure hollow spheres with a submicron diameter (200-500 nm) were prepared by a microwave-assisted hydrothermal method using Cu(OAc)2·H2O, PVP and ascorbic acid solution as the precursors. The morphology of the products could evolve with the hydrothermal time from solid spheres to thick-shell hollow spheres, then to thin-shell hollow spheres, and finally to nanoparticles. ...

متن کامل

Porous carbon spheres and monoliths: morphology control, pore size tuning and their applications as Li-ion battery anode materials.

The development of the next generation of advanced lithium-ion batteries (LIBs) requires new & advanced materials and novel fabrication techniques in order to push the boundaries of performance and open up new and exciting markets. Structured carbon materials, with controlled pore features on the micron and nanometer scales, are explored as advanced alternatives to conventional graphite as the ...

متن کامل

Preparation of Porous Stainless Steel Hollow-Fibers through Multi-Modal Particle Size Sintering towards Pore Engineering

The sintering of metal powders is an efficient and versatile technique to fabricate porous metal elements such as filters, diffusers, and membranes. Neck formation between particles is, however, critical to tune the porosity and optimize mass transfer in order to minimize the densification process. In this work, macro-porous stainless steel (SS) hollow-fibers (HFs) were fabricated by the extrus...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 12  شماره 

صفحات  -

تاریخ انتشار 2017