Design Optimization of Splitter Blades for Rocket Engine Turbopump Design Optimization of Splitter Blades for Rocket Engine Turbopump
نویسندگان
چکیده
....................................................................................................................... iii
منابع مشابه
Multi-objective Optimization for Preliminary Design of Rocket Turbine Engine Using an Evolutionary Algorithm
This work purposes a study on a preliminary design in rocket turbine engine comparing the highest efficient against a lightweight aerodynamic configuration for aerospace endeavors. A framework has been developed based on a fast elitist non-dominated sorted genetic algorithm, well-known as NSGA-II. The Pareto-optimal set yielded is evaluated by a straightforward search method that sorts by mass ...
متن کاملEffect of Crystal Orientation on Fatigue Failure of Single Crystal Nickel Base Turbine Blade Superalloys
High cycle fatigue (HCF) induced failures in aircraft gas turbine and rocket engine turbopump blades is a pervasive problem. Single crystal nickel turbine blades are being utilized in rocket engine turbopumps and jet engines throughout industry because of their superior creep, stress rupture, melt resistance, and thermomechanical fatigue capabilities over polycrystalline alloys. Currently the m...
متن کاملMultiobjective Optimization of Rocket Engine Pumps Using Evolutionary Algorithm
A design optimization method for turbopumps of cryogenic rocket engines has been developed. Multiobjective Evolutionary Algorithm (MOEA) is used for multiobjective pump design optimizations. Performances of design candidates are evaluated by using the meanline pump flow modeling method based on the Euler turbine equation coupled with empirical correlations for rotor efficiency. To demonstrate t...
متن کاملThe Use of Vibration Data for Liquid Rocket Health Monitoring
An approach is presented to the construction of a liquid rocket Health Monitoring (HM) system capable of using both, vibratory and thermodynamic data. Preliminary results are obtained in the area of vibration data tracking/identification, using as a test bed a low-order linear dynamic model of the Space Shuttle Main Engine (SSME) High Pressure Fuel Turbopump (HPFTP). Limitations and future exte...
متن کاملApplication of Probabilistic Methods to Assess Risk due to Resonance in the Design of J-2X Rocket Engine Turbine Blades
The LOX-Hydrogen J-2X Rocket Engine, which is proposed for use as an upper-stage engine for numerous earth-to-orbit and heavy lift launch vehicle architectures, is presently in the design phase and will move shortly to the initial development test phase. Analysis of the design has revealed numerous potential resonance issues with hardware in the turbomachinery turbine-side flow-path. The analys...
متن کامل