An index for operational flexibility in chemical process design. Part I,
نویسندگان
چکیده
One of the key components of chemical plant operability is flexibility the ability to operate over a range of conditions while satisfying performance specifications. A general framework for analyzing flexibility in chemical process design is presented in this paper. A quantitative index is proposed which measures the size of the parameter space over which feasible steady-state operation of the plant can be attained. The mathematical formulation of this index and a detailed study of its properties are presented. Application of the flexibility index in design is illustrated with an example. PITTSBURGH'r " « • • • • • ' -213
منابع مشابه
An Experimental Study on the Operational Factors Affecting the Oil Content of Wax during Dewaxing Process: Adopting a DOE Method
The oil content of the wax produced in a dewaxing process is the key economic parameter that should be reduced as much as possible. Some factors such as the type of solvents, cooling rate, temperature, and solvent to oil ratio influence the dewaxing process. Due to the fact that crude oil differs from place to place and since the operational conditions for wax extraction vary for different type...
متن کاملMathematical Method and Thermodynamic Approaches to Design Multi-Component Refrigeration Used in Cryogenic Process Part I: Optimal Operating Conditions
Abstract: Minimizing the work consumed in refrigeration system is the most effective measure to reduce the cost of products in sub-ambient chemical processes. The introduction of mixed working fluids into refrigeration system in place of pure working fluids is a recent advancement applied in the field. Due to the lack of systematic design method for Mixed Refrigerant Cycle (MRC), conventional a...
متن کاملAn Experimental Design Study for CH4, C2H6 and C2H4 Adsorption and C2s/CH4 Selectivity on 10X Zeolite
CH4, C2H6 and C2H4 are the most important outlet gaseous of oxidative couple methane (OCM) reaction and this process is a new technology for conversion of natural gas to ethane and ethylene products. In this study, adsorption of OCM outlet hydrocarbons over 10X zeolite has been examined at equilibrium conditions. Temperature and pressure are the most effective operational parameters in the batc...
متن کاملStudy of a Fibrous Annual Plant, Luffa Cylindrica for Paper Application Part I: Characterization of the Vegetal
This study is devoted to the morphological, chemical and physical characterization of raw material of the fruit of Luffa Cylindrica. By microscopic analysis, it can be observed that the fruit is composed of an assembly of dependent cords, where four parts are differentiated: external, internal wall, core and bond. Each cord consists of hollow and flexible cylindrical fibers.The external par...
متن کاملA Bi-objective Model for Cellular Manufacturing System Considering Worker Skills, Part Priorities,and Equipment Levels
Here, a new mathematical model for cellular manufacturing systems considering three important features of part priority, levels of machine’s technology, and the operator’s skill is developed. Simultaneous consideration of these features provides a more realistic analysis of the problems in cellular manufacturing systems. A model with multiple design features including cell formation, human reso...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015