Hammer Testing Findings for Solid-State Lighting Luminaires
نویسندگان
چکیده
منابع مشابه
Building Technologies Program SOLID-STATE LIGHTING TECHNOLOGY FACT SHEET
LM-79 testing captures performance characteristics of products that feature solid-state lighting (SSL) technology, including light-emitting diodes (LEDs). This testing provides a snapshot of performance under specified operating conditions at some point in the life of a product, usually at the beginning of operation— these are referred to as initial measurements. It does not address lifetime ra...
متن کاملUnderstanding Photometric Reports for SSL Products
IES LM-79-08: IES Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. Describes the method of absolute photometry for LED luminaires and integral replacement lamps, and associated electrical measurements. Provides performance data (i.e., light output and efficacy, light distribution, and color characteristics) for the entire, integrated product—vers...
متن کاملMonte Carlo Techniques for Direct Lighting
In a distribution ray tracer, the crucial part of the direct lighting calculation is the sampling strategy for shadow ray testing. Monte Carlo integration with importance sampling is used to carry out this calculation. Importance sampling involves the design of integrand-specic probability density functions which are used to generate sample points for the numerical quadrature. Probability densi...
متن کاملASSIST recommends: Striving for Application-specific Evaluation Methods
The ASSIST recommends program has actively promoted application-specific methods for testing and evaluating LED lighting technology to allow for easy comparison with traditional lighting. Recent work has produced alternative methods for evaluating outdoor lighting, including parking lot luminaires and the visual effectiveness of lighting.
متن کاملOptimum design domain of LED-based solid state lighting considering cost, energy consumption and reliability
Design parameters of LED-based solid state lighting products are interdependent and the corresponding requirements are dictated by operating conditions. We propose a scheme to define optimum design domains of LED-based luminaires for a given light output requirement by taking cost, energy consumption and reliability into consideration. First three required data sets to define design domains are...
متن کامل