Static and Dynamic Calculation of Short-Circuit Currents in Synchronous Generators
نویسندگان
چکیده
The calculation of short-circuit currents is mostly based on the methodology of the international standards IEC-60909 and ANSI / IEEE C37.010.1979. This methodology, although it utilizes simple procedures and various assumptions, usually provides satisfactory results. However, dynamic tools such as the ATP/EMTP can be used for the accurate simulation of short-circuit currents. In this paper the influence of some simplifying assumptions on the synchronous generator modeling in both standards is investigated and differences between the static and the dynamic analysis are examined, highlighting cases where significant discrepancies may occur. The analysis includes single or multiple generators connected to isolated or grid connected topologies.
منابع مشابه
A Simple Analytic Method to Model and Detect Non-Uniform Air-Gaps in Synchronous Generators
The air-gap of electrical machines may become non-uniform due to low accuracy of the manufacturing machinery, in assembling processes, or by aging. Detection and monitoring of this phenomenon is very important and of interest. There are several methods to model non-uniform air-gaps and to detect them by monitoring systems. One of the most widely used methods is by the analysis of the line curre...
متن کاملEccentricity Fault Diagnosis Studying for a Round Rotor Synchronous Machine
The paper presents a mathematical base modeling combined to Modified-Winding -Function-Approach (MWFA) for eccentricity fault detection of a round-rotor synchronous machine. For this aim, a 6-pole machine is considered, and the machine inductances are computed by MWFA in healthy and also under eccentricity fault. A numerical discrete-time method has been proposed to machine modeling in voltage-...
متن کاملDetermination of Optimal Allocation and Penetration Level of Distributed Energy Resources Considering Short Circuit Currents
The integration of Distributed Energy Resources (DER) in the distribution network has plenty of advantages if their allocation and Penetration Level (PL) are done appropriately. Hence, the challenge of finding the best allocation and PL of DERs in large distribution networks is an important but intricate problem. This paper proposes a novel methodology to simultaneously determine the optimal lo...
متن کاملOnline Aggregation of Coherent Generators Based on Electrical Parameters of Synchronous Generators
This paper proposes a novel approach for coherent generators online clustering in a large power system following a wide area disturbance. An interconnected power system may become unstable due to severe contingency when it is operated close to the stability boundaries. Hence, the bulk power system controlled islanding is the last resort to prevent catastrophic cascading outages and wide area bl...
متن کاملInfluence of Converter and inverter on dynamic behavior of the GMAW process
This paper investigates the dynamic behavior of Gas Metal Arc Welding (GMAW) process for two types of power supplies –inverter and rectifier- for short circuit transfer mode. The large ripples on the rectifier power source are able to perturb the metal transfer mode. In this experimental work some operating points in the short circuit mode have been selected using an automatic pipeline welding ...
متن کامل