Bonding to titanium.
نویسندگان
چکیده
The recent synthesis of a crystalline compound containing Ti bonded to cyclopentadienyl and a substituted dienyl fragment prompted the question of whether Ti-C contacts that were found to be shorter than other such bonded contacts in the same molecule should be considered as short nonbonded contacts or "nonclassical metal-to-saturated-carbon atom interactions", fitting the description of agostic interactions. This question has a unique answer within the framework of the quantum theory of atoms in molecules (QTAIM). QTAIM uses the measurable electron density to assign a molecular structure and the physics of an open system to determine the nature of the bonded interactions. All of the classical bonding descriptors, when recast in terms of the topologies of the electron density and the pair density, are faithfully recovered when QTAIM is applied to the hydrocarbon framework of the Ti complex, thereby justifying its application to the analysis of the Ti-C interactions. No bond paths are found to link the Ti to the carbons exhibiting the "short contacts", and the topology of the density gives no indication of an incipient change in structure that would result in their formation.
منابع مشابه
Investigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process
In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...
متن کاملInvestigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process
In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...
متن کاملEFFECT OF TiO2 ADDITION ON BONDING STRENGTH OF CaO-P2O5 Na2O-TiO2 BIOACTIVE GLASS CERAMIC COATING
The effect of titanium dioxide addition on bonding strength of CaO-P2O5 -Na 2O-TiO2glass-ceramic system was investigated as a coating on titanium substrate. Thus, different amounts of TiO2 (2, 3.5 and 5mol %) were added to the base glass batch composition. The prepared glaze slips were applied on the substrate by dip coating method, dried and then heat treated at various temperatures. After tha...
متن کاملInterfacial Structure Analysis on Direct Bonding Metals to Plastics†
This research investigated the direct bonding mechanism of dissimilar materials such as metals and plastic by the conventional hot pressing process. The press area of 4 x 4 mm2 was used for direct bonding. The results of the study showed that titanium was completely bonded to polyamide 66. On the other hand, titanium was not bonded to polystyrene. In the case of bonding material of titanium wit...
متن کاملMicrostructure and mechanical properties evaluation of diffusion bonded joints of titanium to AISI 304 austenitic stainless steel
In this study, diffusion bonding between titanium and AISI 304 austenitic stainless steel by Ag interlayer was investigated. In order to carry out this research, samples prepared after surface preparation were placed inside the fixture and placed at the temperatures of 750,800 and 850 °C in the 30,60 and 90 min in the furnace under argon protective gas. The phase transformation and microstructu...
متن کاملWelding and Joining of Titanium Aluminides
Welding and joining of titanium aluminides is the key to making them more attractive in industrial fields. The purpose of this review is to provide a comprehensive overview of recent progress in welding and joining of titanium aluminides, as well as to introduce current research and application. The possible methods available for titanium aluminides involve brazing, diffusion bonding, fusion we...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Inorganic chemistry
دوره 40 22 شماره
صفحات -
تاریخ انتشار 2001