Role of TiO2 Surface Passivation on Improving the Performance of p‐InP Photocathodes
نویسندگان
چکیده
The role of TiO2 thin films deposited by atomic layer deposition on p-InP photocathodes used for solar hydrogen generation was examined. It was found that, in addition to its previously reported corrosion protection role, the large valence band offset between TiO2 and InP creates an energy barrier for holes reaching the surface. Also, the conduction band of TiO2 is well-aligned with that of InP. The combination of these two effects creates an electronselective contact with low interface recombination. Under simulated solar illumination in HClO4 aqueous electrolyte, an onset potential of >800 mV vs RHE was achieved, which is the highest yet reported for an InP photocathode.
منابع مشابه
Artificial Photosynthesis on TiO2-Passivated InP Nanopillars.
Here, we report photocatalytic CO2 reduction with water to produce methanol using TiO2-passivated InP nanopillar photocathodes under 532 nm wavelength illumination. In addition to providing a stable photocatalytic surface, the TiO2-passivation layer provides substantial enhancement in the photoconversion efficiency through the introduction of O vacancies associated with the nonstoichiometric gr...
متن کاملp-Type InP nanopillar photocathodes for efficient solar-driven hydrogen production.
Water splitting by using sunlight for the production of hydrogen yields a storable product, which can be used as a fuel. There is considerable research into H2 generation, namely the reduction of protons to H2 in aqueous solution using semiconductor photocathodes. To maximize the photoelectrochemical (PEC) performance, the selection of the active materials and device configurations should be ca...
متن کاملEnhanced Photocatalytic Reduction of CO2 to CO through TiO2 Passivation of InP in Ionic Liquids.
A robust and reliable method for improving the photocatalytic performance of InP, which is one of the best known materials for solar photoconversion (i.e., solar cells). In this article, we report substantial improvements (up to 18×) in the photocatalytic yields for CO2 reduction to CO through the surface passivation of InP with TiO2 deposited by atomic layer deposition (ALD). Here, the main me...
متن کاملEngineering MoSx/Ti/InP Hybrid Photocathode for Improved Solar Hydrogen Production
Due to its direct band gap of ~1.35 eV, appropriate energy band-edge positions, and low surface-recombination velocity, p-type InP has attracted considerable attention as a promising photocathode material for solar hydrogen generation. However, challenges remain with p-type InP for achieving high and stable photoelectrochemical (PEC) performances. Here, we demonstrate that surface modifications...
متن کاملEffective Surface Passivation of InP Nanowires by Atomic-Layer-Deposited Al2O3 with POx Interlayer
III/V semiconductor nanostructures have significant potential in device applications, but effective surface passivation is critical due to their large surface-to-volume ratio. For InP such passivation has proven particularly difficult, with substantial depassivation generally observed following dielectric deposition on InP surfaces. We present a novel approach based on passivation with a phosph...
متن کامل