Catalytic Pyrolysis of Willow Wood with Me/ZSM-5 (Me = Mg, K, Fe, Ga, Ni) to Produce Aromatics and Olefins

نویسندگان

  • Huiyan Zhang
  • Jian Zheng
  • Rui Xiao
چکیده

Biomass catalytic fast pyrolysis is one of the most promising technologies for the production of renewable aromatics and olefins directly from solid biomass. In this study, catalytic pyrolysis experiments were carried out on biomass in a fluidized bed reactor using typical metal-loaded (Mg, K, Fe, Ga, and Ni) ZSM-5 zeolites as catalysts. The effects of catalysts on the product distribution and bio-oil components were investigated to determine the cheapest and most efficient metalloaded catalyst. The results showed that bio-oil yields with metal-loaded catalysts (40 to 43.4 wt.%) were a little lower than that of pure ZSM-5 (46.4 wt.%). Metal-loaded catalysts produced more CO2 and CO than did pure ZSM-5. Fe/ZSM-5 produced the highest yield of CO2 (13.8 wt.%), as well as the highest yield of olefins (2.7 wt.%). Fe/ZSM-5 showed the same catalytic characteristics as Ga/ZSM-5 (aromatic hydrocarbon proportion in bio-oils of more than 80%), but it is much cheaper than Ga/ZSM-5.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Fabrication of Ga2O3/ZSM-5 Hollow Fibers for Efficient Catalytic Conversion of n-Butane into Light Olefins and Aromatics

In this study, the dehydrogenation component of Ga2O3 was introduced into ZSM-5 nanocrystals to prepare Ga2O3/ZSM-5 hollow fiber-based bifunctional catalysts. The physicochemical features of as-prepared catalysts were characterized by means of XRD, BET, SEM, STEM, NH3-TPD, etc., and their performances for the catalytic conversion of n-butane to produce light olefins and aromatics were investiga...

متن کامل

Low Temperature Catalytic Cracking of Heavy Feedstock Optimized by Response Surface Method

Upgrading of cracked PFO (Pyrolysis fuel oil) for production of fuels, such as gasoline and light gasoil, was carried out in a semi batch reactor. Two different kinds of mesoporous and microporous catalysts, MCM-41 and ZSM-5, were used. Modification methods, such as ion exchange and impregnation with Fe and Ti, were done for tuning the acidity of the catalyst. XRD, FT-IR, and XRF analyzes were ...

متن کامل

Mössbauer and Magnetic Studies of Iron-Zeolite and Iron-Cobalt Zeolite Catalysts Used in Synthesis Gas Conversion

Medium-pore (diameter ~ 6A) zeolites such as ZSM-5 and silicalite impregnated with Group VIII metals provide selective catalytic pathways for the conversion of synthesis gas to gasoline or olefins. Mössbauer and magnetic studies on these catalysts containing iron or iron plus cobalt are reported. The zeolites were impregnated with metal nitrate solutions, reduced, and carbided to yield showed F...

متن کامل

Catalytic Conversion of Methanol to Hydrocarbons over different wt% Ni-HZSM-5

Due to crude oil is limited, new resources for fuel and petrochemicals are important to be developed. Biogas or NG (Natural Gas) can be easily converted into methanol which can be reacted over zeolite to produce olefins and gasoline. HZSM-5 zeolite catalyst has been used in this study and its modification by (0.5wt%, 1wt%, 2wt% and 4wt %) Ni to convert methanol to hydrocarbons (MTH). Catalysts ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013