Bridge Deck Deicing
نویسندگان
چکیده
Concrete bridge decks are prone to ice accumulation. The use of road salts and chemicals for deicing is cost effective but causes damage to concrete and corrosion of reinforcing steel in concrete bridge decks. This problem is a major concern to transportation officials and public works due to rapid degradation of existing concrete pavements and bridge decks. The use of insulation materials for ice control and electric or thermal heating for deicing have been attempted and met limited success. Conductive concrete may be defined as a cementitious composite, which contains a certain amount of electronically conductive components to attain stable and relatively high electrical conductivity. When connected to a power source, heat is generated due to the electrical resistance in the cement admixture with metallic particles and steel fibers. Based on the results of a transient heat transfer analysis, a thin conductive concrete overlay on a bridge deck has the potential to become a cost effective deicing method. Small-scale slab heating experiments have shown that an average power of about 48 W/m2 was generated by the conductive concrete to raise the slab temperature from -1.1°C (30°F) to 15.6°C (60°F) in 30 minutes. This power level is consistent with the successful deicing applications using electrical heating cited in the literature. The work described in this paper is part of an on-going research project being conducted for Nebraska Department of Roads. Two large slabs are under construction for bridge deck deicing experiment in natural environment to monitor power consumption and deicing performance. The construction costs and experimental data will be used to evaluate the cost effectiveness of using a conductive concrete overlay for bridge deck deicing or anti-icing.
منابع مشابه
Airfield Pavement Deicing with Conductive Concrete Overlay
Conductive concrete is a cementitious admixture containing a certain volumetric ratio of electrically conductive materials to attain high and stable electrical conductivity. Due to its electrical resistance, a thin overlay of conductive concrete can generate enough heat to prevent ice formation when energized by AC power. Under a research sponsored by Nebraska Department of Roads, Yehia and Tua...
متن کاملEffect of Link Slab on Seismic Response of Two Span Straight and Skew Bridges
Highway bridges are frequently constructed as simple span structures with steel or concrete girders and a cast-in-place concrete deck, spanning from one pier to another. At each end of the simple span deck, a joint is provided for deck movement due to temperature, shrinkage, and creep. Bridge deck joints are expensive and pose many problems with regard to bridge maintenance. Elimination of deck...
متن کاملStructural analysis of the deck of access bridges in offshore docks under dynamic loading of moving heavy vehicles (Case study: 10 feet concrete deck with prefabricated beam, under the passage of 125-ton bogie)
Ports are the most important economic, political and military bottlenecks. This puts shoreline structures (port) in the class of important structures and they have a crucial role in the countries’ life. Pile and deck wharf and their access bridges and offshore deck (jetties), are one of the parts which are supplier of coupling between the land and the waterfront. Correct and exact estimation of...
متن کاملConstriction Scour In Pressurized Flow Condition (RESEARCH NOTE)
When depth of flow past a river bridge exceeds opening under the bridge, the flow under the bridge becomes pressurized. The water is directed downward and under the bridge deck, causing increase in velocity and shear stress on the bed thereby increasing bed scour. This is termed as Pressure Flow Scour. The present study investigates the phenomenon of pressure flow scour resulting from a submerg...
متن کامل