Simulation Research and Parameter Optimization for Hypoid Gear NC Machining
نویسنده
چکیده
The paper studied hypoid gear CNC machining theory and simulation processing. Through construct a simulation case of hypoid gear machining system, optimization processing parameters for the main aspects, verify the effectiveness of pre-correction system.
منابع مشابه
New Modeling Methods of Spiral Bevel and Hypoid Gear Based On the CAD Surface Design Features
Based on the comprehensive analysis of previous research about the spiral bevel and hypoid gear, principle of forming spherical involute tooth surface was proposed with the spherical involute that was new theory applied in the field of their modeling. According to precise shape of tooth surfaces, each part of the quick and accurate derivations of the basic parametric equation of the tooth profi...
متن کاملCLASSIFICATION OF THE FEED-RATE OPTIMIZATION TECHNIQUES: A CASE STUDY IN MINIMIZING CNC MACHINING TIME
Along with increasingly development of CAD/CAM software and their application in various industries, minimizing of the machining time is found to be more important. In this paper, firstly the concerning subjects are discussed regarding classification of the optimization techniques. These are programming techniques, high speed machining techniques and feed rate optimization techniques. As a case...
متن کاملConstructive and Technological Development of Hypoid Gears
In this paper we present a new method for analyzing and developing the hypoid gears in order to improve their constructive and technological particularities.. The first part describes the methodologies for optimization the backlash. Then, the variation of the normal vectors and curvature is analyzed in the neighbourhood of the contact point. In the final part is presented a method for modelling...
متن کاملGear Optimization
In this study, an optimization methodology is presented to systematically define head-cutter geometry and machine tool settings to introduce optimal tooth modifications in spiral bevel and hypoid gears. The goal of the optimization is to simultaneously minimize the tooth contact pressure and the angular displacement error of the driven gear (the transmission error), to maximize the elastohydrod...
متن کاملPerformance analysis of generated hypoid gear based on measured tooth flank form data
Article history: Received 18 February 2013 Received in revised form 19 September 2013 Accepted 22 September 2013 Available online 24 October 2013 A method for predicting and analyzing the tooth contact pattern, vibration, and strength of a generated hypoid gear is needed to achieve a low-noise design and adequate quality control. However, it is not easy to analyze the performance of a generated...
متن کامل