Effects of the addition of electrolyte on liquid infiltration in a hydrophobic nanoporous silica gel.
نویسندگان
چکیده
In this letter, we report the experimental results of pressure induced infiltration in the hydrophobic nanopores of a silica gel. The infiltration pressure increases with the prolonged surface treatment time, whereas the infiltration volume is not dependent on the surface coverage. When temperature increases, if the liquid phase is pure water, the infiltration pressure would decrease, which is in agreement with the classic contact angle measurement results at large solid surfaces. As an electrolyte is added, however, the variation in infiltration pressure is negligible over a broad temperature range.
منابع مشابه
Effects of decomposition-treatment temperature on infiltration pressure of a surface modified nanoporous silica gel
When a nanoporous silica gel surface modified by silyl groups is decomposition-treated at a relatively low temperature, while the network is stable, the organic surface layers can be deactivated. As a result, the degree of hydrophobicity, which can be measured by the liquid infiltration pressure, is lowered. The infiltration and defiltration behaviors of liquid are dependent on the controlled d...
متن کاملA selectively-energy-absorbing nanoporous system
By forcing an aqueous solution of N-lauroylsarcosine sodium salt and 8-anilino-1-naphthalenesulfonic acid ammonium salt in a hydrophobic nanoporous silica gel, the external work can be largely dissipated due to the amplified capillary effect. The sorption isotherm curve is two-staged, and the height and the width of stage-I infiltration plateau can be adjusted separately by controlling the liqu...
متن کاملEffects of surface treatment of MCM-41
To apply mobile crystalline material 41 (MCM-41), which has a larger specific surface area than many other nanoporous silicas, for energy absorption, chlorotrimethylsilane treatment is performed to adjust the structure of inner surfaces of nanopores. As the treatment time is sufficiently long, the pore surface can be changed from hydrophilic to hydrophobic, leading to an energy absorption effic...
متن کاملModification of Silica surface by Titanium sol synthesis and characterization
Hydrophobic silica titanium nanoparticles (STNPs) were successfully synthesized by the sol-gel process using liquid modification. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) studies were demonstrated the attachment of titanium on the silica surface. Titanium content enhanced the agglomeration of particles as shown in topography results. The N2 adsorption-desorption followed T...
متن کاملModification of Silica surface by Titanium sol synthesis and characterization
Hydrophobic silica titanium nanoparticles (STNPs) were successfully synthesized by the sol-gel process using liquid modification. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) studies were demonstrated the attachment of titanium on the silica surface. Titanium content enhanced the agglomeration of particles as shown in topography results. The N2 adsorption-desorption followed T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Langmuir : the ACS journal of surfaces and colloids
دوره 24 14 شماره
صفحات -
تاریخ انتشار 2008