Air invasion in a granular layer immersed in a fluid: Morphology and dynamics
نویسندگان
چکیده
We investigate the morphology and dynamics of the region invaded by air injected at the bottom of an immersed granular bed. Previous experimental results point out the formation of a fluidized zone with a parabolic shape which does not depend, in the stationary regime, on the injection flow-rate. By tilting the experiment, we can tune the effective gravity in the system. We show that it does not affect significantly the morphology either. A numerical study made it possible to access the typical height and width of the structure, which are governed by the relative effects of gravity and capillarity. After a brief review on this subject, we propose first, new experimental observations on the air invasion regimes and on the morphology of the fluidized zone, in particular its growth dynamics; then, we complement the previous numerical study by considering the influence of the bottom boundary condition. In particular, we quantify the morphology of the invaded region when the gas is injected in the bulk, thus when air is likely to propagate downwards. These results are of practical importance in the prediction of the morpholG.V. acknowledges a grant by CONICYT (Comisión Nacional de Investigación Cient́ıfica y Tecnológica, Gobierno de Chile) and financial support from FONDECYT Project No.11121300. G. Varas Instituto de F́ısica, Pontificia Universidad Católica de Valparáıso, Avenida Brasil 2950, Valparáıso, Chile. Previously at Laboratoire de Physique, Université de Lyon, Ecole Normale Supérieure CNRS, 46 Allée d’Italie, 69364 Lyon Cedex 07, France. J.-C. Géminard · V. Vidal Laboratoire de Physique, Université de Lyon, Ecole Normale Supérieure CNRS, 46 Allée d’Italie, 69364 Lyon Cedex 07, France. E-mail: [email protected] ogy of gas invasion in soils, from CO2 sequestration to pollutant propagation.
منابع مشابه
CFD Modeling of the Feed Distribution System of a Gas-Solid Reactor
Granular flow simulation using CFD has received a lot of attention in recent years. In such cases, CFD is either, coupled with Discrete Element Method (DEM) techniques for appropriate incorporation of inter-particle collisions, or the Eulerian CFD approach is used in which granular particles are treated as they were fluid. In the present study, a CFD analysis was performed...
متن کاملExperimental study and application of computational fluid dynamics on the prediction of air velocity and temperature in a ventilated chamber
The shape of the air flow in the interior is heavily influenced by the air distribution system and the way air enters and exits. By numerically simulating flow by computational fluid dynamics, one can determine the flow pattern and temperature distribution and, with the help of the results, provide an optimal design of the air conditioning system. In this study, a chamber was first constructed ...
متن کاملStabilizing fluid–fluid displacements in porous media through wettability alteration
We study experimentally how wettability impacts fluid–fluid displacement patterns in granular media. We inject a low-viscosity fluid (air) into a thin bed of glass beads initially saturated with a more-viscous fluid (a water/glycerol mixture). Chemical treatment of glass surfaces allows us to control the wetting properties of the medium and modify the contact angle θ from 5 deg (drainage) to 12...
متن کاملEffect of Bubble/Droplet Morphology and Slippage on Attachment Induction Time in Deoiling Flotation Process
A modified model has been analytically developed to describe the induction time of an elliptic air bubble in contact with an elliptic hydrophobic oil droplet. The role of hydrophobicity was revealed in the slippage of liquid over the surfaces of bubble and droplet. In this condition, the analytical relationships for pressure distribution and consequently hydrodynamic resistance force through th...
متن کاملFluid Dynamics in a Copper Converter: an Investigation on Mixing Phenomena in an Experimental Model
In this study, the mixing phenomena and fluid dynamics in a copper converter have been experimentally investigated using a physical model. The physical model is a 1:5 horizontal tank made of Plexiglas. The mixing phenomena have been characterized by experimentally measuring the mixing time using a tracer dispersion technique. Moreover, the effects of the air flow rate and lance submergence on t...
متن کامل