Free form surface modeling and analysis
نویسنده
چکیده
Creating 2D and 3D models in CAD and following creation of drawings are standard procedures for constructing in the current industrial practice. Most models of industrially produced machine parts can be made by basic processes of modeling using construction or hybrid methods. Listed procedures are based on input of a basic – primitive body and its shaping using predefined design elements, combined with the use of construction methods from the default 2D geometry and using methods of extraction, rotation, or dragging a profile along the curve. Requirements of industrial practice and current production technological possibilities often require the implementation part of a more general form, which cannot be created by mentioned methods. In advanced stages of 3D models it is possible to use the methods of free surface shaping, based on creating of parametric, semi parametric or non-parametric network of 3D curves representing the basis for generating surface that defines the boundary of solid body.
منابع مشابه
BEM-FDM modeling of water free surface interaction with trapped air in OWC chamber for calculating generated power
Free surface modeling plays an important role in some ocean structures design, especially in Oscillating Water Column (OWC) devices. Boundary element method (BEM) is a suitable method for free surface modeling due to its simplicity, quick solving, and low data storage requirement. In this paper, BEM was used for free surface modeling in OWC chamber and out of it. Linear kinematic and dynamic bo...
متن کاملTHREE DIMENSIONAL MODELING OF TURBULENT FLOW WITH FREE SURFACE IN MOLD FILLING
In the present study a Finite Difference Method has been developed to model the transient incompressible turbulent free surface fluid flow. A single fluid has been selected for modeling of mold filling and The SOLA VOF 3D technique was modified to increase the accuracy of simulation of filling phenomena for shape castings. For modeling the turbulence phenomena k-e standard model was used. In or...
متن کاملExperimental Study of Masonry Structure Under Impact Loading and Comparing it with Numerical Modeling Results via Finite Element Model Updating
Given the sophisticated nature of the blast phenomenon in relation to structures, it is of significance to accurately investigate the structure behavior under blast loads. Due to its rapid and transient nature, blast loading is one of the most important dynamic loadings on the structures. Since masonry materials are widely used as the partition and bearing walls in the existing and newly-built ...
متن کاملKinetics analysis of electrophoretic deposition using small signal and large signal modeling, Case study: Nano-Mullite suspension
Having sufficient and accurate understanding about kinetics of phenomena, could be an important reason for further technological progresses. Finding a white-box mathematical model for weight vs. time curves of Electrophoretic Deposition (EPD) using large and small signal analysis has been studied thoroughly in the present investigation. Weight-Time curves of nano-Mullite suspension have been tr...
متن کاملNumerical Modeling of the Stepped Planing Hull in Calm Water
This article describes a 3D CFD (computational fluid dynamics) simulation implementation of the stepped planning hull in calm water. The turbulent free surface flow around the stepped planing hull is computed with a RANSE method, using the solver ANSYS-CFX. The turbulence model used is standard k–ε. In order to simulate the disturbed free surface, VOF model is implemented. The CFD model has bee...
متن کاملMATHEMATICAL ANALYSIS OF NEWLY DESIGNED TWO POROUS LAYERS SLIDER BEARING WITH A CONVEX PAD UPPER SURFACE CONSIDERING SLIP AND SQUEEZE VELOCITY USING FERROFLUID LUBRICANT
This paper proposes mathematical modeling and analysis of ferrofluid lubricated newly designed slider bearing having convex pad (surface or plate) stator with two porous layers attached to the slider. The problem considers the effect of slip velocity proposed by Sparrow et. al.[1] and modified by Shah et. al.[2] at the film-porous interface. The squeeze velocity V=−which appears when the upper ...
متن کامل