Solar energy conversion with photon-enhanced thermionic emission
نویسندگان
چکیده
Photon-enhanced thermionic emission (PETE) converts sunlight to electricity with the combined photonic and thermal excitation of charge carriers in a semiconductor, leading to electron emission over a vacuum gap. Theoretical analyses predict conversion efficiency that can match, or even exceed, the efficiency of traditional solar thermal and photovoltaic converters. Several materials have been examined as candidates for radiation absorbers and electron emitters, with no conclusion yet on the best set of materials to achieve high efficiency. Analyses have shown the complexity of the energy conversion and transport processes, and the significance of several loss mechanisms, requiring careful control of material properties and optimization of the device structure. Here we survey current research on PETE modeling, materials, and device configurations, outline the advances made, and stress the open issues and future research needed. Based on the substantial progress already made in this young topic, and the potential of high conversion efficiency based on theoretical performance limits, continued research in this direction is very promising and may yield a competitive technology for solar electricity generation.
منابع مشابه
Photon-enhanced thermionic emission for solar concentrator systems.
Solar-energy conversion usually takes one of two forms: the 'quantum' approach, which uses the large per-photon energy of solar radiation to excite electrons, as in photovoltaic cells, or the 'thermal' approach, which uses concentrated sunlight as a thermal-energy source to indirectly produce electricity using a heat engine. Here we present a new concept for solar electricity generation, photon...
متن کاملLimit of efficiency for photon-enhanced thermionic emission vs. photovoltaic and thermal conversion
Conversion of sunlight by photon-enhanced thermionic emission (PETE) combines a photonic process similar to photovoltaic cells, and a thermal process similar to conventional thermionic converters. As a result, the upper limit on the conversion efficiency of PETE devices is not the same as the Shockley– Queisser (SQ) limit that corresponds to the bandgap of the absorbing material, nor to the Car...
متن کاملEnhanced selective thermal emission with a meta-mirror following Generalized Snell’s Law
Thermal emission plays a critical role in a wide variety of applications, including adjusting radiative losses in photovoltaics and selective solar absorbers, as well as enhancing the emission of high energy photons for thermophotovoltaics and photon-enhanced thermionic emission. In this work, we consider the benefit to thermal emission associated with replacing conventional mirrors with meta-m...
متن کاملThermionic and Photo-Excited Electron Emission for Energy-Conversion Processes
*Correspondence: Timothy S. Fisher , Birck Nanotechnology Center, 1205 West State Street, West Lafayette, IN 47907, USA e-mail: [email protected] This article describes advances in thermionic and photo-emission materials and applications dating back to the work on thermionic emission by Guthrie (1873) and the photoelectric effect by Hertz (1893). Thermionic emission has been employed for elec...
متن کامل