An optical chemical sensor for thorium (IV) determination based on thorin.
نویسندگان
چکیده
A selective method for the determination of thorium (IV) using an optical sensor is described. The sensing membrane is prepared by immobilization of thorin-methyltrioctylammonium ion pair on triacetylcellulose polymer. The sensor produced a linear response for thorium (IV) concentration in the range of 6.46 x 10(-6) to 9.91 x 10(-5)mol L(-1) with detection limit of 1.85 x 10(-6)mol L(-1). The regeneration of optode was accomplished completely at a short time (less than 20s) with 0.1 mol L(-1) of oxalate ion solution. The relative standard deviation for ten replicate measurements of 2.15 x 10(-5) and 8.62 x 10(-5)mol L(-1) of thorium was 2.71 and 1.65%, respectively. The optode membrane exhibits good selectivity for thorium (IV) over several other ionic species and are comparable to those obtained in case of spectrophotometric determination of thorium using thorin in solution. A good agreement with the ICP-MS and spiked method was achieved when the proposed optode was applied to the determination of thorium (IV) in dust and water samples.
منابع مشابه
Design novel optical sensor for determination of bismuth based on immobilization of 4-(4-nitrophenyl)-1-naphthol on a triacetylcellulose membrane
A novel optical sensor has been proposed for sensitive determination of bismuth ion basedon immobilization of 4-(4-nitrophenylazo)-1-naphthol on a triacetylcellulose membrane.Chemical binding of bismuth ions in solution with a 4-(4-nitrophenylazo)-1-naphtholimmobilized on the triacetylcelluse surface could be monitored spectrophotometrically. Theoptode shows excellent response over wide concent...
متن کاملDesign and Evaluation of a Novel Bismuth Optical Sensor Using PC-ANN Application
The characterization of and construction of a new optical sensor based on the immobilization of Pyrocatechol Violet on a triacetylcellulose membrane was described to for the determination of bismuth (III) in real samples. The interaction between sensing membrane and bismuth (III) was caused at pH 3.80 in acetate buffer solution and the color changed from yellow to blue along with the appearance...
متن کاملOptical pH Sensor Based on Quinizarin for Alkaline pH Regions
The development of an optical pH sensor based on immobilization of quinizarin (1,4-dihydroxyanthraquinone) on a triacetylcellulose membrane was described. The resulting membrane exhibited fast color change from yellow to violet, while changing the pH in alkaline region. The immobilized quinizarin showed a broader dynamic range from (pH 9.4-11.4) with respect to free form (pH 8.8-10.4). The sens...
متن کاملA Polymeric Membrane Electrode Based on p-tert-butyl- thiacalix[4]arene Derivative for Thorium Determination
The aim of this study was to construct and characterize an ion selective electrode for the potentiometric determination of thorium ions. On hand study we introduced a new calixarene molecule p-tert-butyl-thiacalix[4]arene derivative as ionophore for thorium(IV) selective polymeric membrane electrode. Due to the decisive role of solvent mediators, we fabricated membranes with the plasticizers DB...
متن کاملA Novel Coated Graphite Rod Th(IV) Ion Selective Electrode Based On Thorium Oxinate Complex and Its Application
Preparation, characterization, and application of a novel coated graphite rod thorium selective electrode based on thorium 8-hydroxyquinolate [thorium oxinate, Th(C9H6NO)4.2H2O] complex ionophore as a sensing material, dioctylphthalate (DOP) as a solvent mediator, and PVC as a matrix have been developed. The coated graphite rod electrode exhibits a linear Nernstian response over the concentrati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of hazardous materials
دوره 173 1-3 شماره
صفحات -
تاریخ انتشار 2010