Spray Combustion at Normal and Reduced Gravity in Counterflow and Co-flow Configurations

نویسنده

  • Alessandro Gomez
چکیده

Liquid fuel dispersion in practical systems is typically achieved by spraying the fuel into a polydisperse distribution of droplets evaporating and burning in a turbulent gaseous environment In view of the nearly insurmountable difficulties of this two-phase flow, a systematic study of spray evaporation and burning in configurations of gradually increasing levels of complexity, starting from laminar sprays to fully turbulent ones, would be useful. A few years ago we proposed to use an electrostatic spray of charged droplets for this type of combustion experiments under well-defined conditions. In the simplest configuration, a liquid is fed into a small metal tube maintained at several kilovolts relative to a ground electrode few centimeters away. Under the action of the electric field, the liquid meniscus at the outlet of the capillary takes a conical shape, with a thin jet emerging from the cone tip (cone-jet mode). This jet breaks up farther downstream into a spray of charged droplets --the so-called ElectroSpray (ES). Several advantages distinguish the electrospray from alternative atomization techniques: 1) it can produce quasi-monodisperse droplets over a phenomenal size range; ii) the atomization, that is strictly electrostatic, is decoupled from gas flow processes, which provides some flexibility in the selection and control of the experimental conditions; iii) the Coulombic repulsion of homopolafly charged droplets induces spray selfdispersion and prevents droplet coalescence; iv) the ES provides the opportunity of studying regimes of slip between droplets and host gas without compromising the control of the spray properties; v) the compactness and potential controllability of this spray generation system makes it appealing for studies in reduced-gravity environments aimed at isolating the spray behavior from natural convection complications. With these premises, in March 1991 we initiated a series of experiments under NASA sponsorship (NAG3-1259 and 1688) in which the ES was used as a research tool to examine spray combustion in counter-flow and co-flow spray diffusion flames, as summarized below. The ultimate objective of this investigation is to examine the formation and burning of sprays of liquid fuels, at both normal and reduced gravity, first in laminar regimes and then in turbulent ones.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Three Dimensional Modeling of Combustion Process and Emissions Formationin Pre and Main Chambers of an Idirect Injection Diesel Enginge

The combustion processes and emission formation in pre and main chambers of a Lister 8.1 IDI diesel are simulated with the Computational Fluid Dynamics (CFD) code. The model includes spray atomization, mixture formation and distribution and subsequently the combustion processes and emissions formation modeling are carried out with considering of flow configurations in two chambers. A part load ...

متن کامل

اثر نرخ کرنش در احتراق جریان متقابل ذرات آلومینیوم

     Combustion of solid particles from the two aspects of "safety of industries related metal particles" and "optimization of combustion in solid fuels engines " is important. At this article the effect of strain rate on the counterflow premixed flame of aluminum particles is studied. Energy equations for counterflow combustion of metal particles derived and analytically solved. Curve of flame...

متن کامل

Rotating injector in DI diesel engine for improving performance and reducing NOx emission

Oxides of Nitrogen are the major emission from a diesel engine. It is due to heterogeneous diffusion combustion system with fuel-rich regions, which produce high local temperature around the periphery of the spray where high formation rate of NO is promoted. Various techniques are therefore employed to reduce the NOX emission like EGR, SCR, etc. In this present work a rotating injector is a tec...

متن کامل

Studies on Soot Formation and Combustion in Turbulent Spray Flames: Modeling and Experimental Measurement

The present study is concerned with measuring and simulating soot formation and combustion in turbulent liquid fuel spray flames. Soot concentrations inside the combustor are measured by filter paper technique. The simulation is based on the solution of the fully-coupled conservation equations for turbulent flow, chemical species kinetic modeling, fuel droplet evaporation and combustion and...

متن کامل

An Experimental formulation for PFI injector penetration length versus time and pressure using high speed spray imaging results

Recently, there have been problems with particulate matter pollution in diesel engines and it has reduced production rate of these engines and also, it has accelerated the development of new technologies for PFI and GDI gasoline engines. The spray characteristics has significant impact on the combustion efficiency, power and emissions on internal combustion engines. In This study, effect of inj...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005