A design of a PhC-enhanced LED for electroluminescence cooling
نویسندگان
چکیده
It is known that the wall-plug efficiency (WPE) of a light-emitting diode (LED) can exceed unity and that electroluminescence cooling (ELC) happens in this scenario. However, it is difficult to observe the associated temperature drop due to the relatively small cooling power and the overwhelming heat flux from the ambient. In this work, we design a photonic crystal (PhC) enhanced LED which has smaller surface area as well as thermal mass compared with an encapsulated LED. We also present thermal models to evaluate the temperature drop of the LED in air and vacuum.
منابع مشابه
Photonic crystal light-emitting diodes fabricated by microsphere lithography.
Instead of using conventional electron lithography, a two-dimensional photonic crystal consisting of a hexagonal array of triangular air-holes was created on the surface of a GaN LED substrate using microsphere lithography. The microspheres self-assemble into a single-layered hexagonal-close-packed array acting as an etch mask. A significant enhancement in photoluminescence intensity was record...
متن کاملDesign and Modeling for Enhancement of Light Extraction in Light-emitting Diodes with Archimedean Lattice Photonic Crystals
Light extraction efficiency of light-emitting diodes (LEDs) based on various photonic crystal (PhC) structures is investigated in this study. By using the plane wave method and the finite element method, the influence of several factors on the enhancement of light extraction is discussed, including lattice type, the density of states from a photonic band diagram, the ratio of cylinder radius an...
متن کاملDeveloping a Novel Temperature Model in Gas Lifted Wells to Enhance the Gas Lift Design
In the continuous gas lift operation, compressed gas is injected into the lower section of tubing through annulus. The produced liquid flow rate is a function of gas injection rate and injection depth. All the equations to determine depth of injection assumes constant density for gas based on an average temperature of surface and bottomhole that decreases the accuracy of gas lift design. Also g...
متن کاملAn Empirical Analysis to Design Enhanced Customer Lifetime Value Based on Customer Loyalty:Evidences from Iranian Banking Sector
The more a marketing paradigm evolves, the more long-term relationship with customers gains its importance. Also, the move towards a customer-centred approach to marketing, coupled with the increasing availability of customer transaction data, has led to an interest in understanding and estimating customer lifetime value (CLV). There are several researches about the CLV formulas and calculating...
متن کاملA Comprehensive Approach to an Optimum Design and Simulation Model of a Mechanical Draft Wet Cooling Tower
The present paper describes the designing of a thermally and economically optimum mechanical draft counter-flow wet cooling tower. The design model allows the use of a variety of packing materials in the cooling tower toward optimizing heat transfer. Once the optimum packing type is chosen, a compact cooling tower with low fan power consumption is modelled within the known design variables....
متن کامل