ANSYS Workbench User's Guide
ثبت نشده
چکیده
منابع مشابه
Simulation & Optimization for the Gear System of a 6-DOF Manipulator Using Flexible Dynamic of ANSYS
This paper presents a novel way for a structural dynamic simulation analysis on a three-dimensional (3-D) finite element (FE) model of a 6-DOF Manipulator using ANSYS Workbench 13.0 that allows integrated optimization. The load between driving and driven gear is delivered by elastic frictional contact, which leads to some non-liner contact problems, and the contact problems are solved according...
متن کاملDigital System Prototyping for Medical Devices
Multiphysics simulation refers to the inclusion of multiple physical phenomena in a single computational model. This may or may not require multiple solvers. For example, a mechanical solver could be used to model stent deployment to a vessel wall, and then either a mechanical or computational fluid dynamics (CFD) solver could be used to model drug diffusion in the vessel tissue. In situations ...
متن کاملDetermination of required torque to spin aircraft wheel at approach using ANSYS CFX
Many patents have suggested that spinning the aircraft wheel before touchdown would lessen tyre wear as indicated by landing smoke and rubber deposites on the runway caused by skidding wheel at the point of impact. In this paper, the required torque to spin the aircraft wheel at approach speed has been calculated using ANSYS Workbench CFX, which is used to determine the wheel aerodynamic forces...
متن کاملComponent Mode Synthesis in ANSYS Workbench Simulation
At ANSYS Workbench 11.0, the ANSYS Rigid Dynamics add-on module enables users to define joint connections in complex kinematic assemblies. This ability to model rigid and flexible parts in ANSYS Workbench Simulation via joints is beneficial since the rigid parts are modeled with mass and rigid links (that is, rigid contact elements), thus providing load transfer capabilities and allowing users ...
متن کاملSimulation of Aerodynamic Divergence and Flutter on Wind Turbines using ANSYS-CFX
The recent development of large wind turbines poses new challenges with regard to understanding the mechanisms surrounding unsteady flow-structure interaction. The larger and more flexible blades imply risks from an aeroelastic point of view and urge the need to properly understand and model these phenomena. Due to limited experimental data available in this field, Computational Fluid dynamics ...
متن کامل