Non Iterative Inversion Method for Electrical Resistance, Capacitance and Inductance Tomography for Two Phase Materials
نویسندگان
چکیده
This paper focuses on the application of a recently proposed non-iterative inversion method for three different imaging techniques for two phases materials. Specifically, two techniques concern the retrieval of the resistivity of a conductor (electrical resistance tomography and magnetic induction tomography) and one technique concerns the retrieval of the permittivity of a dielectric material (electrical capacitance tomography). All have in common a monotonicity property that is the mathematical basis for the non-iterative inversion method. This quantitative non-iterative inversion method requires a modest computational effort. Specifically, it requires the solution of a number of forward problems increasing linearly with the number of pixels (voxels) used to discretize the unknown.
منابع مشابه
Multiphase Flow Imaging by Capacitance Tomography Using Simulated Annealing Inversion
Electrical capacitance tomography (ECT) is a technique for obtaining crosssectional images of the electrical permittivity distribution inside an electrically non-conducting body. It can be used to map the composition of two-phase mixtures like gas-oil systems and provides a useful tool for multiphase flow visualization and measurement and potential applications in petroleum industry. The ECT se...
متن کاملCompact Lossy Inductance Simulators With Electronic Control
In this paper two R‑L network simulator configurations employing a single VDDIBA, one resistance and one grounded capacitance are presented. The first configuration is a grounded series resistor-inductor (R‑L) network simulator and the second configuration is intended for grounded parallel resister-inductor (R‑L) circuit simulation. Both the proposed circuits enjoy several beneficial features s...
متن کاملECT and LS-SVM Based Void Fraction Measurement of Oil-Gas Two-Phase Flow
A method based on Electrical Capacitance Tomography (ECT) and an improved Least Squares Support Vector Machine (LS-SVM) is proposed for void fraction measurement of oil-gas two-phase flow. In the modeling stage, to solve the two problems in LS-SVM, pruning skills are employed to make LS-SVM sparse and robust; then the Real-Coded Genetic Algorithm is introduced to solve the difficult problem...
متن کاملEmploying dual frequency phase sensitive demodulation technique to improve the accuracy of voltage measurement in magnetic induction tomography and designing a labratoary prototype
Magnetic induction tomography (MIT) is a promising modality for noninvasive imaging due to its contactless technology. Being a non-contact safe imaging technique, MIT has been an appropriate method in compare to other electrical tomography. In this imaging method, a primary magnetic field is applied by excitation coils to induce eddy currents in the material to be studied and a secondary magnet...
متن کاملDevelopment of Electromagnetic Tomography (EMT) for Industrial Applications. Part 2: Image Reconstruction and Software Framework
This paper is the second of two parts and reviews results of a recently completed project based at the University of Aveiro, UMIST and the University of Lancaster. This research represents a fundamental investigation of the potential of using electromagnetic inductance measurements for industrial tomographic applications. This second paper concentrates on image reconstruction and software relat...
متن کامل