Theory and computation of photopolymerization-induced phase transition and morphology development in blends of crystalline polymer and photoreactive monomer.

نویسندگان

  • Pankaj Rathi
  • Thein Kyu
چکیده

A hypothetical phase diagram of a crystalline polymer/photoreactive monomer mixture has been calculated on the basis of phase field (PF) free energy of crystal solidification in conjunction with Flory-Huggins (FH) free energy of liquid-liquid demixing to guide the morphology development during photopolymerization of poly(ethylene oxide)/triacrylate blend. The self-consistent solution of the combined PF-FH theory exhibits a crystalline-amorphous phase diagram showing the coexistence of solid+liquid gap bound by the liquidus and solidus lines, followed by an upper critical solution temperature at a lower temperature. When photopolymerization was triggered in the isotropic region, i.e., slightly above the crystal melting transition temperatures, the depressed melting transition line moves upward. When it surpasses the reaction temperature, both crystallization and phase separation occur. The temporal evolution of phase morphology is examined in the context of time-dependent Ginzburg-Landau equations coupled with the energy balance (heat conduction) equation using the aforementioned PF-FH free-energy densities. Of particular interest is that the emerged morphology in the crystalline blends depends on the competition between dynamics of liquid-liquid phase separation and/or liquid-solid phase transition (i.e., crystallization) and photopolymerization rates.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effects of photointensity gradient on directional crystal growth in blends of crystalline polymer and photoreactive monomer undergoing photopolymerization-induced phase transformation.

Effects of light intensity gradient on development of intricate hierarchical morphology of semicrystalline polyethylene oxide (PEO) and photoreactive diacrylate (DA) blends undergoing photopolymerization-induced crystallization have been demonstrated experimentally and theoretically. The melting temperature of PEO was found to decline upon addition of DA monomer. A solid-liquid phase diagram ha...

متن کامل

Photopolymerization-induced crystallization and phase separation in poly(ethylene oxide)/triacrylate blends.

The present article describes experimental and theoretical investigations of miscibility and crystallization behavior of blends of poly(ethylene oxide) (PEO) and triacrylate monomer (TA) using differential scanning calorimetry and optical microscopy. The PEO/TA blends manifested a single T(g) varying systematically with composition suggestive of a miscible character in their amorphous states. M...

متن کامل

Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends

In this work, ternary polymer blends based on polypropylene (PP)/ polyethylene terephthalate (PET) /poly(styrene-b (ethylene-co-butylene)-b-styrene) (SEBS) triblock copolymer and a reactive maleic anhydride grafted SEBS (SEBS-g-MAH) at various compositions were prepared by co-rotating twin screw extruder. The effects of PET, SEBS and SEBS-g-MAH compatibilizer on morphology of the blends were ex...

متن کامل

Polymerization of propylene in a minireactor: Effect of polymerization conditions on particle morphology

Gas phase polymerization of propylene was carried out in a semi-batch minireactor using a commercially supported Ziegler–Natta (ZN) catalyst. The influence of variables including monomer partial pressure, external electron donor, reaction temperature and time on the particle morphology and size distribution was investigated. Generally, more uniform fragmentation and particle densities were obta...

متن کامل

The influence of branching efficiency on the rheology and morphology of melt state long chain branched polypropylene/polybutene-1 blends

In this study, the compatibility of the blends of polypropylene (PP) and polybutene-1(PB-1) homopolymer before and after long chain branching process were studied. The blends were prepared and long-chain branched directly via reactive extrusion process in presence of free radical initiator and trimethylolpropane tri methacrylate (TMPTMA) poly functional monomer. The optimum percentage of TMPTMA...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review. E, Statistical, nonlinear, and soft matter physics

دوره 79 3 Pt 1  شماره 

صفحات  -

تاریخ انتشار 2009