Surface coating on carbon nanofibers with alumina precursor by different synthesis routes
نویسندگان
چکیده
Alumina-reinforced carbon nanofiber nanocomposites were prepared using different routes; powders mixture, colloidal route and sol-gel process followed by spark plasma sintering (SPS). CNFs/xAl2O3 (x=10-50 vol.%) were prepared through nanopowders mixing in a high-energy attrition milling. The main limitations in the preparation of this kind of nanocomposites are related to the difficulty in obtaining materials with a homogeneous distribution of both phases and the different chemical nature of CNFs and Al2O3, which causes poor interaction between them. A surface coating of CNFs by wet chemical routes with an alumina precursor is proposed as a very effective way to improve the interaction between CNFs and Al2O3. An improvement of 50% in fracture strength was found for similar nanocomposite compositions when the surface coating *Manuscript Click here to view linked References
منابع مشابه
Control of nitrogen insertion during the growth of nitrogen-containing carbon nanofibers on cordierite monolith walls.
A well attached coating of nitrogen-functionalised carbon nanofibers (N-CNFs) has been prepared on the walls of cordierite monolith channels. It is formed via concurrent decomposition of ethane and ammonia catalysed by nickel nanoparticles dispersed on alumina coated cordierite monolith. N-CNF/monoliths synthesis employing several growth temperatures and NH(3) compositions was exhaustively char...
متن کاملSynthesis and characterization of Alumina (Al2O3) nanoparticles prepared by simple sol-gel method
Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...
متن کاملSynthesis and characterization of Alumina (Al2O3) nanoparticles prepared by simple sol-gel method
Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...
متن کاملImprovement of CNFs/ZrO2 composites properties with a zirconia nanocoating on carbon nanofibers by sol-gel method
The development of new carbon nanofibers-ceramic nanocomposite materials with excellent mechanical, thermal and electrical properties is interesting for a wide range of industrial applications. Among the ceramic materials, zirconia stands out for their excellent mechanical properties. The main limitations in the preparation of this kind of nanocomposites are related with the difficulty in obtai...
متن کاملSurface coating of carbon nanofibers/nanotubes by electrodeposition for multifunctionalization.
Carbon nanomaterials in the form of paper sheets have been used as platforms to achieve multifunctionality. Combined with electrochemical deposition, room temperature synthesis of magnetic Ni coatings on individual carbon nanofibers (CNF) and/or carbon nanotubes (CNT) has been realized through solution penetration and ion diffusion. In addition to significant electrical conductivity improvement...
متن کامل