Fault Analysis and Solution on Bucket Dropping Accident in Hoisting System
نویسندگان
چکیده
Overwinding was the main accident in lifting systems of coal mine and bucket dropping accident was the most serious overwinding accident. According to the cause and mechanism of the bucket dropping accident in main shaft hoisting systems, the conclusion that overloading promotion was the main cause of bucket crash accident was obtained with the fault tree analysis method. One theoretical analysis model was established in order to prevent the occurrence of overloaded bucket dropping accident. The model provided scientific basis and steps in theory for qualitative and quantitative analysis on the cause of falling bucket accident and for the study on accident prediction and prevention. This article proposed several feasible technical measures to prevent the bucket crash accident, which had important guiding significance in practical application. Copyright © 2014 IFSA Publishing, S. L.
منابع مشابه
A comparison between the Kazerun (Iran) and the North Anatolian (Turkey) fault systems in fault interaction and seismicity migration based on the spatiotemporal analysis of earthquakes
The Kazerun Fault System (KFS) is a right-lateral strike slip fault system in the middle part of the Zagros seismogenic zone in Iran. Historical and instrumental earthquake data catalogs of this fault system show good evidence of fault interactions and seismic migrations. This study provides evidence for the migration of seismicity in the middle part of the Zagros region along the segments of t...
متن کاملOvercoming the uncertainty in a research reactor LOCA in level-1 PSA; Fuzzy based fault-tree/event-tree analysis
Probabilistic safety assessment (PSA) which plays a crucial role in risk evaluation is a quantitative approach intended to demonstrate how a nuclear reactor meets the safety margins as part of the licensing process. Despite PSA merits, some shortcomings associated with the final results exist. Conventional PSA uses crisp values to represent the failure probabilities of basic events. This causes...
متن کاملTC-FLSFCL Provision for Improvement of Distribution System Reliability by TOPSIS based NSGA-II Method
An approach for assignment of the optimal location and tap changer adjustment related to flux-lock type superconducting fault current limiters with tap changer (TC-FLSFCL) is used in this paper by debating the reduction of fault current flowing from each device and enhancement of reliability varying with customer type in a distribution network connected with distribution generation (DG). TC-FLS...
متن کاملFault Location in Active Distribution Networks Using Improved Whale Optimization Algorithm
To realize the self-healing concept of smart grids, an accurate and reliable fault locator is a prerequisite. This paper presents a new fault location method for active power distribution networks which is based on measured voltage sag and use of whale optimization algorithm (WOA). The fault induced voltage sag depends on the fault location and resistance. Therefore, the fault location can be f...
متن کاملReduce the maximum scour depth downstream of Flip Bucket Spillway through the spillway geometry optimization (study released spillway dam Kurdistan)
The Performance of shooting pool, in addition to the quality of the area in which the flow collides with it, depends to the height of the jet drop, the angle of the water flow, the depth of the jet and the concentration of the jet. By increasing the height of the jet drop, the fall velocity increases and subsequently the jetchr('39')s energy will be more intrusive. Different collision area from...
متن کامل