Integrated, variable-reluctance magnetic minimotor
نویسندگان
چکیده
The use of lithography and electroplating to fabricate variable-reluctance, nearly planar, integrated minimotors with 6-mm-diameter rotors on silicon wafers is described. The motors consist of six electroplated Permalloy@ horseshoe-shaped cores that surround the rotor. Copper coils are formed around each core. The Permalloy and copper electroplating baths, electroplating seed layers, and through-mask plating techniques are similar to those used to fabricate inductive thin-film heads. High-aspect-ratio optical lithography or X-ray lithography was used to form the various resist layers. The rotors were fabricated separately, released from the substrate, and then slipped onto the shaft, which was plated as part of the stator fabrication process. The fabrication processes for stator and rotor are described in this paper, and initial minimotor operation data are presented.
منابع مشابه
The finite element analysis of the linear hybrid reluctance motor for the electromagnetic launch system
The Electromagnetic Aircraft Launch System (EMALS) is being developed utilizing electrical and electronic technologies. EMALS is emerging in order to replace the existing steam catapult on naval carriers. Recently, the double-sided linear launcher has drawn increasing attention of researchers. This paper presents the design and analysis of the Linear Hybrid Reluctance Motor (LHRM). This new mot...
متن کاملComprehensive Design Procedure and Manufacturing of Permanent Magnet Assisted Synchronous Reluctance Motor
Combining the main advantages of the permanent magnet synchronous motors and pure synchronous reluctance motors (SynRM), permanent magnet assisted synchronous reluctance motor (PMaSynRM) has been considered as a promising alternative to the conventional induction motors. In this paper, utilizing a macroscopic design parameter, called insulation ratio along the q-axis, and based on the magnetic ...
متن کاملA Novel Approach to Design the Dual Rotor Switched Reluctance Motor Based Electric Vehicles
Electric and hybrid electric vehicles are attractive candidates for sustainable transportation due to its higher efficiency and low emission. The critical choice on the electric motors is its capability of motoring and regenerative braking characteristics. Switched reluctance machines are viable candidate as with proper control and extended constant power range operation replacing the multi-gea...
متن کاملA Novel Hybrid-Excited Modular Variable Reluctance Motor for Electric Vehicle Applications: Analysis, Comparison, and Implementation
A variable reluctance machine (VRM) has been proven to be an outstanding candidate for electric vehicle (EV) applications. This paper introduces a new double-stator, 12/14/12-pole three-phase hybrid-excited modular variable reluctance machine (MVRM) for EV applications. In order to demonstrate the superiorities of the proposed structure, the static torque characteristics and dynamic performance...
متن کاملSimulation of a Variable Reluctance Steping Motor for Sinusoidal and Step Exitations
Steady-state dynamic simulation of a variable reluctance stepping motor is carried out by applying two different excitation voltages. First a single-step voltage is applied to the motor, and a sinusoidal voltage, as the first term of Fourier series of the single-step voltage, is then used as the input voltage of the motor. In both cases plots of machine torque, current and speed are presented. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IBM Journal of Research and Development
دوره 42 شماره
صفحات -
تاریخ انتشار 1998