High Frequency Modeling of a Hydraulic Actuation Flight Control System
نویسندگان
چکیده
The objective of this work was to develop a high fidelity model representative on high frequencies of a FCS with an active-active hydraulic actuation. The performance for step input and frequency response were analyzed, showing to be a model close to a real system and representative even in high frequencies.
منابع مشابه
Modeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine
High-speed maglev train is considered an ideal vehicle in the 21st Century, as an important part of the train, the travel mechanism bears and delivers a variety of vertical and horizontal alternating load in operation, it affects the operation safety of the train directly, so key components of the travel mechanism should under fatigue strength test by fatigue test machine.The paper proposed a v...
متن کاملFlight Test Experience with an Electromechanical Actuator on the F-18 Systems Research Aircraft
Development of reliable power-by-wire actuation systems for both aeronautical and space applications has been sought recently to eliminate hydraulic systems from aircraft and spacecraft and thus improve safety, efficiency, reliability, and maintainability. The Electrically Powered Actuation Design (EPAD) program was a joint effort between the Air Force, Navy, and NASA to develop and fly a serie...
متن کاملModelling of Flight Control Hydraulic Actuators Considering Real System Effects
The study investigates the effects of servo valve nonlinearity, actuation compliance and friction related nonlinearity on the dynamics of a flight control surface, during its deployment through an electro-hydraulic actuation system. Starting from the pilot command, a realistic model of the electro-hydraulic actuation system is evolved, which includes the command lags, servo valve nonlinearity, ...
متن کاملNonlinear static and dynamic behaviors of a microresonator under discontinuous electrostatic actuation
This article studied static deflection, natural frequency and nonlinear vibration of a clamped-clamped microbeam under discontinues electrostatic actuation. The electrostatic actuation was induced by applying AC-DC voltage between the microbeam and electrode plate. In contrast to previous works, it was assumed that length of the electrode plate was smaller than that of the microbeam. In additio...
متن کاملNonlinear Analysis of a Flexible Beam Actuated by a Couple of Active SMA Wire Actuators
There are two different ways of using SMA wires as actuators for shape control of flexible structures; which can be either embedded within the composite laminate or externally attached to the structure. Since the actuator can be placed at different offset distances from the beam, external actuators produce more bending moment and, consequently, considerable shape changes with the same magnitude...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010