Optimization of PECVD process for ultra-thin tunnel SiOx film as passivation layer for silicon heterojunction solar cells
نویسندگان
چکیده
Ultra-thin silicon oxide (a-SiOx:H) films have been grown by means of plasma enhanced chemical vapor deposition (PECVD) to replace the standard hydrogenated amorphous silicon (a-Si:H) passivation layer for silicon heterojunction solar cells to reduce parasitic absorption. Additionally, silicon oxide surfaces are well known as superior substrates for the nucleation enhancement for nanocrystalline silicon doped films. Symmetrical passivation samples were fabricated with variable a-SiOx:H layers with a thickness of 10-1.5 nm and characterized after several annealing steps (25-650 °C). The best value reached so far on <100> oriented Si wafers is: implied open circuit voltage of 686 mV and minority carrier lifetime of 1.6 ms after annealing at 300 °C. Such values were found to be reproducible even for ultra-thin a-SiOx:H layers (1.5 nm).
منابع مشابه
21% Efficiency Silicon Heterojunction Solar Cells Produced with Very High Frequency Pecvd
Silicon heterojunction solar cells have high opencircuit voltages thanks to excellent passivation of the wafer surfaces by thin intrinsic amorphous silicon (aSi:H) layers deposited by plasma-enhanced chemical vapor deposition (PECVD). By using in-situ plasma diagnostics and ex-situ film characterization, we show that the best a-Si:H films for passivation are produced from deposition regimes clo...
متن کاملOn the influence of ICP–PECVD deposition parameters and annealing on the properties of a–Si:H passivation layers
Hydrogenated amorphous silicon (a–Si:H) can be applied as a passivation layer in silicon heterojunction (SHJ) solar cells. In this project, depositions of a–Si:H thin films have been carried out using ICP–PECVD under several deposition conditions. This has been done to gain insight into the deposition process and how the properties of the deposited film can be controlled. To reach this goal, th...
متن کاملUnderstanding of Passivation Mechanism in Heterojunction c-Si Solar Cells
Intrinsic hydrogenated amorphous silicon (a-Si:H) films can yield in outstanding electronic surface passivation of crystalline silicon (c-Si) wafers as utilized in the HIT (heterojunction with intrinsic thin layer) solar cells. We have studied the correlation between the passivation quality and the interface nature between thin amorphous layers and an underlying c-Si substrate for understanding...
متن کاملSiliconPV 2011
In silicon heterojunction solar cells, the passivation of the crystalline silicon wafer surfaces and fabrication of emitter and back surface field are all performed by intrinsic and doped amorphous silicon thin layers, usually deposited by plasma-enhanced chemical vapor deposition (PECVD). By using in-situ diagnostics during PECVD, it is found that the passivation quality of such layers directl...
متن کاملOrigin of passivation in hole-selective transition metal oxides for crystalline silicon heterojunction solar cells
Transition metal oxides (TMOs) have recently attracted interest as an alternative to boron/phosphorous doped layers in crystalline silicon heterojunction solar cells. In this work, the interface between n-type c-Si (n-Si) and three thermally evaporated TMOs (MoO3, WO3 and V2O5) was investigated by transmission electron microscopy and secondary ion-mass/x-ray photoelectron spectroscopy. For the ...
متن کامل