Machining with Minimal Cutting Fluid
ثبت نشده
چکیده
The purpose of cutting fluid in a machining operation is to cool the workpiece, reduce friction, and wash away the chips. The cutting fluid contributes significantly toward machining cost and also possesses environmental threats. In the past, there have been some attempts to minimize the amount of cutting fluid in machining. This chapter reviews some prominent ways to minimize the application of cutting fluid and their impact on the machining performance.
منابع مشابه
Analysis of effect of Minimum Quantity Lubrication on different machining parameters Cutting Force, Surface Roughness and Tool Wear by Hard Turning of AISI-4340 Alloy Steel a Review
This paper deals with the study of various machining process and show the effect of different cutting parameters on the properties of material. There are several important factors in the product quality which are surface finish, cutting temperature, tool life and coolant quality. The use of coolant generally causes life of tools and it also maintains work piece surface properties without damage...
متن کاملPerformance Evaluation of Different Types of Cutting Fluid in the Machining of Aisi 01 Hardened Steel Using Pulsed Jet Minimal Quantity Lubrication System
This paper presents the performance evaluation of three different cutting fluids used in a minimal quantity lubrication (MQL) system. The MQL system, developed in-house at the University of Malaya, was capable of delivering high velocity cutting fluid in narrow pulsed jet forms at a rate of 2 ml/min and a pressure of 20 MPa. The three cutting fluids chosen were neat oil, soluble oil and semi-sy...
متن کاملPerformance Evaluation of Nano Graphite Inclusions in Cutting Fluids with Mql Technique in Turning of Aisi 1040 Steel
Liberation of heat and generation of friction associated with any machining operation ever pose a problem which not only reduce the tool life but also impair quality of the product. Cutting fluids have been the conventional choice to curtail friction and temperatures in machining because of its lubrication and cooling actions. However, considering health hazards posed by the conventional cuttin...
متن کاملSynthesis and Characterization of Graphene Oxide Nanoparticles and investigation of Nanofluid Application in Machining Process
The quality of machined workpieces, particularly precious metals, is the main goal of every machining process. A suitable cutting fluid can substantially affect the machining outcome. The study is novel in that it uses nanofluids in the machining process to mitigate the adverse effects of high temperatures and friction. Graphene oxide (GO) nanoparticles were synthesized using the modified Humme...
متن کاملPerformance Evaluation and Economic Analysis of Minimum Quantity Lubrication with Pressurized/Non-Pressurized Air and Nanofluid Mixture
Abstract—Water miscible cutting fluids are conventionally used to lubricate and cool the machining zone. But issues related to health hazards, maintenance and disposal costs have limited their usage, leading to application of Minimum Quantity Lubrication (MQL). To increase the effectiveness of MQL, nanocutting fluids are proposed. In the present work, water miscible nanographite cutting fluids ...
متن کامل