Kinetic model for surface reconstruction.

نویسندگان

  • V N Kuzovkov
  • O Kortlüke
  • W von Niessen
چکیده

A microscopic kinetic model for the alpha <==> beta [e.g., hex <==> 1x1 for Pt(100) and 1x2 <==> 1x1 for Pt(110)] surface reconstruction is investigated by means of the mean field approximation and Monte Carlo simulations. It considers homogeneous phase nucleation that induces small surface phase defects. These defects can grow or decline via phase border propagation in dependence on the chemical coverage by an adsorbate A (CO). An asymmetry in the adsorbate surface diffusion from one surface phase to the other gives rise to two critical coverages that determine the intervals of stability of the homogeneous alpha phase, the dynamically stable heterogeneous state, and the homogeneous beta phase. Both surfaces show a very similar qualitative behavior regarding the phase transitions that are of second order in both cases. As a result the experimentally observed nonlinear island growth rate and the critical coverages can be explained at a quantitative level.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimization of Acid Blue 113 Adsorption from Aqueous Solutions by Natural Bentonite Using Response Surface Model: Isotherm and Kinetic Study

Background & objectives: Dyes are one of the main environmental pollutants of textile industrial wastewater which are toxic, carcinogenic, mutagenic, and non-biodegradable. Therefore, in this study, Response Surface Methodology (RSM) was used to investigate the operational parameters and determine the optimum conditions for the removal of acid blue 113 in the presence of bentonite. Methods: The...

متن کامل

Simulation of nanodroplet impact on a solid surface

A novel computational fluid dynamics and molecular kinetic theory (CFD-MK) method was developed to simulate the impingement of a nanodroplet onto a solid surface. A numerical solution of the Navier–Stokes equation using a volume-of-fluid (VOF) technique was used to model nanodroplet deformation. Dynamic contact angle during droplet impact was obtained by molecular kinetic theory. This dynamic c...

متن کامل

Experimental design and response surface modeling for optimization of humic substances removal by activated carbon: A kinetic and isotherm study

The presence of humic acid (HA) in water treatment processes is very harmful and the cause of undesirable color, taste, and smell. Drinking water containing high concentrations of humic substances can be the cause of many health problems. Therefore, the removal of these compounds from water resources is a very important topic. In this research, response surface methodology (RSM) has been used t...

متن کامل

Optimization and kinetic evaluation of acid blue 193 degradation by UV/peroxydisulfate oxidation using response surface methodology

The optimization of process conditions for the degradation of Acid Blue 193 by UV/peroxydisulfate was investigated using response surface methodology (RSM). The effects of four parameters namely initial K2S2O8 concentration, UV irradiation, temperature, and initial dye concentration on two process responses, color removal and the rate constants of the first-order kinetic equations, were investi...

متن کامل

Adsorption of Ni(II) and Cd(II) Ions from Aqueous Solutions by Modified Surface of Typha latifolia L. Root, as an Economical Adsorbent

The modified surface of Typha latifolia L. root (MSTL), as an alternative economical adsorbent, wasused for the removal of Ni (II) and Cd(II) ions from aqueous solutions. The effect of initial pH, initialconcentration of metal ion, and contact time was investigated in a batch system at room temperature.The kinetics data could be fitted well by pseudo-second-order model with correlation coeffici...

متن کامل

Dye Removal from Single and Quaternary Systems Using Surface Modified Nanoparticle: Isotherm and Kinetics

In this paper, dye removal ability of the surface modified nanoparticle SMN copper ferrite from single and quaternary systems was investigated. Acid Blue 92 AB92, Direct Green 6 DG6, Direct Red 23 DR23 and Direct Red 80 DR80 were used as model compounds. The effect of surfactant concentration, adsorbent dosage, dye concentration and pH on dye removal was evaluated. The adsorption isotherm and k...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review. E, Statistical, nonlinear, and soft matter physics

دوره 66 1 Pt 1  شماره 

صفحات  -

تاریخ انتشار 2002