Effects of strain rate in laser forming
نویسندگان
چکیده
Experimental investigation and numerical simulation of the influence of the strain rate in laser forming are presented. To isolate and effectively study the strain rate effects, which are temperature dependent, a "constant peak temperature" method is developed with the aid of numerical modeling and solution. Under the condition of the constant peak temperature, the effects of strain rate on forming efficiency, residual stress and hardness of the formed parts are studied both experimentally and numerically. In the numerical model, the temperature dependence and strain-rate dependence of the flow stress and other material properties are considered. The simulation results are consistent with the experimental observations. The micro-structural changes of the formed parts are also presented.
منابع مشابه
Investigation on Formability of Tailor-Welded Blanks in Incremental Forming
Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...
متن کاملNumerical and Experimental Study of Strain Rate Effects in Laser Forming
Experimental investigation and numerical simulation of the influence of the strain rate in laser forming are presented. To isolate and effectively study the strain rate effects, which are temperature dependent, a ‘‘constant peak temperature’’ method is developed with the aid of numerical modeling and solution. Under the condition of the constant peak temperature, the effects of strain rate on f...
متن کاملEffects of temperature gradient magnitude on bending angle in laser forming process of aluminium alloy sheets
Laser forming is a thermal forming process which uses laser beam irradiation to produce the desired final forms. In this article, the effect of temperature gradient across Al 6061-T6 aluminum sheets on bending angle is studied. Input parameters including laser power, scan velocity, beam diameter, and sheet thickness are the effective process parameters which influence the temperature gradient....
متن کاملRecent Development in Laser Materials Processing
Recent research and development in laser machining and laser forming processes is reviewed. In the laser machining area, striation formation and prediction, and gas jet workpiece interactions are discussed. In the laser forming area, strain rate effects, and convex forming are presented.
متن کاملMicrostructure Integrated Modeling of Multiscan Laser Forming
Laser forming of steel is a hot forming process with high heating and cooling rate, during which strain hardening, dynamic recrystallization, and phase transformation take place. Numerical models considering strain rate and temperature effects only usually give unsatisfactory results when applied to multiscan laser forming operations. This is mainly due to the inadequate constitutive models emp...
متن کامل