Micro-textured conductive polymer/silicon heterojunction photovoltaic devices with high efficiency
نویسندگان
چکیده
Related Articles Surface-plasmon enhanced absorption in organic solar cells by employing a periodically corrugated metallic electrode Appl. Phys. Lett. 101, 163303 (2012) Surface-plasmon enhanced absorption in organic solar cells by employing a periodically corrugated metallic electrode APL: Org. Electron. Photonics 5, 234 (2012) Development of pulsed laser deposition for CdS/CdTe thin film solar cells Appl. Phys. Lett. 101, 153903 (2012) Simulation of non-linear recombination of charge carriers in sensitized nanocrystalline solar cells J. Appl. Phys. 112, 074319 (2012) Enhanced carrier transport by defect passivation in Si/SiO2 nanostructure-based solar cells Appl. Phys. Lett. 101, 153902 (2012)
منابع مشابه
Simple Photovoltaic Device Based on Multiwall Carbon Nanotube/Silicon Heterojunction
Multiwall carbon nanotubes (MWCNTs) are grown via chemical vapour deposition method directly on a stainless steel substrate. Raman spectroscopy and transmission electron microscopy are the techniques chosen to characterize the structure of the synthesized carbon nanotubes: few structural defects are detected. After their removal from the stainless steel substrate, the as-grown MWCNTs are then a...
متن کاملSimple Photovoltaic Device Based on Multiwall Carbon Nanotube/Silicon Heterojunction
Multiwall carbon nanotubes (MWCNTs) are grown via chemical vapour deposition method directly on a stainless steel substrate. Raman spectroscopy and transmission electron microscopy are the techniques chosen to characterize the structure of the synthesized carbon nanotubes: few structural defects are detected. After their removal from the stainless steel substrate, the as-grown MWCNTs are then a...
متن کاملTitanium dioxide/silicon hole-blocking selective contact to enable double- heterojunction crystalline silicon-based solar cell
Articles you may be interested in High efficiency sequentially vapor grown n-i-p CH3NH3PbI3 perovskite solar cells with undoped P3HT as p-type heterojunction layer Carrier recombination losses in inverted polymer: Fullerene solar cells with ZnO hole-blocking layer from transient photovoltage and impedance spectroscopy techniques High efficiency double heterojunction polymer photovoltaic cells u...
متن کاملHigh Performance of PEDOT:PSS/n-Si Solar Cells Based on Textured Surface with AgNWs Electrodes
Hybrid heterojunction solar cells (HHSCs) have gained extensive research and attention due to simple device structure and low-cost technological processes. Here, HHSCs are presented based on a highly transparent conductive polymer poly(3,4ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS) directly spin-coated on an n-type crystalline silicon with microscale surface textures, which are pr...
متن کاملNanoimprinted large area heterojunction pentacene-C60 photovoltaic device
A pentacene-C60 bilayer heterojunction organic photovoltaic device with interpenetrating donor-acceptor interface was fabricated by nanoimprinting the pentacene layer prior to C60 deposition. An amorphous silicon substrate nanostructured using an excimer laser was imprinted onto the pentacene layer at high temperature and pressure, using a nanoimprinting lithography system to form a textured pe...
متن کامل