Graphene-P(VDF-TrFE) multilayer film for flexible applications.
نویسندگان
چکیده
A flexible, transparent acoustic actuator and nanogenerator based on graphene/P(VDF-TrFE)/graphene multilayer film is demonstrated. P(VDF-TrFE) is used as an effective doping layer for graphene and contributes significantly to decreasing the sheet resistance of graphene to 188 ohm/sq. The potentiality of graphene/P(VDF-TrFE)/graphene multilayer film is realized in fabricating transparent, flexible acoustic devices and nanogenerators to represent its functionality. The acoustic actuator shows good performance and sensitivity over a broad range of frequency. The output voltage and the current density of the nanogenerator are estimated to be ∼3 V and ∼0.37 μAcm(-2), respectively, upon the application of pressure. These values are comparable to those reported earlier for ZnO- and PZT-based nanogenerators. Finally, the possibility of rollable devices based on graphene/P(VDF-TrFE)/graphene structure is also demonstrated under a dynamic mechanical loading condition.
منابع مشابه
A wafer-scale graphene and ferroelectric multilayer for flexible and fast-switched modulation applications.
Here we report a wafer-scale graphene/P(VDF-TrFE)/graphene multilayer for light-weight, flexible and fast-switched broadband modulation applications. The P(VDF-TrFE) film not only significantly reduces the sheet resistance of graphene throughout heavy doping of ∼0.8 × 10(13) cm(-2) by nonvolatile ferroelectric dipoles, but also acts as an efficient electro-optic (EO) layer. Such multilayered st...
متن کاملVertically aligned P(VDF-TrFE) core-shell structures on flexible pillar arrays
PVDF and P(VDF-TrFE) nano- and micro- structures have been widely used due to their potential applications in several fields, including sensors, actuators, vital sign transducers, and energy harvesters. In this study, we developed vertically aligned P(VDF-TrFE) core-shell structures using high modulus polyurethane acrylate (PUA) pillars as the support structure to maintain the structural integr...
متن کاملP(VDF-TrFE) Film on PDMS Substrate for Energy Harvesting Applications
We have developed and demonstrated a highly flexible P(VDF-TrFE) film-based energy harvesting device on a PDMS substrate, avoiding any complex composites and patterned structures. The structural and electrical properties of the P(VDF-TrFE) film was investigated using multiple characterization techniques and an optimized film of 7 μm thickness was used for the energy harvesting application. The ...
متن کاملNanoconfinement induced crystal orientation and large piezoelectric coefficient in vertically aligned P(VDF-TrFE) nanotube array
Vertically aligned piezoelectric P(VDF-TrFE) nanotube array comprising nanotubes embedded in anodized alumina membrane matrix without entanglement has been fabricated. It is found that the crystallographic polar axes of the P(VDF-TrFE) nanotubes are oriented along the nanotubes long axes. Such a desired crystal orientation is due to the kinetic selection mechanism for lamellae growth confined i...
متن کاملP(VDF-TrFE) Polymer-Based Thin Films Deposited on Stainless Steel Substrates Treated Using Water Dissociation for Flexible Tactile Sensor Development
In this work, deionized (DI) water dissociation was used to treat and change the contact angle of the surface of stainless steel substrates followed by the spin coating of P(VDF-TrFE) material for the fabrication of tactile sensors. The contact angle of the stainless steel surface decreased 14° at -30 V treatment; thus, the adhesion strength between the P(VDF-TrFE) thin film and the stainless s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- ACS nano
دوره 7 4 شماره
صفحات -
تاریخ انتشار 2013