Revaluation of rock mass classification using multivariate analysis and estimation of the tunnel support
نویسندگان
چکیده
RMR, Rock Mass Rating, is one of the famous rock classifications. However, RMR was proposed empirically and absolutely depends on the experience of engineer. Therefore, engineering verification is needed for RMR system itself. In this study, the factor analysis and the multiple regressions were performed in order to evaluate the validity of rating factor of RMR. Also numerical analysis was carried out using the FLAC based on Taguchi method, a kind of robust designs, in order to examine the support of tunnel corresponding to the revaluated RMR. As the result of the analysis new RMR was proposed with five minimized factors of intact rock strength, RQD, spacing, persistence and roughness of discontinuities.
منابع مشابه
Estimation of penetration rate of tunnel boring machines using Monte-Carlo simulation method
One of the most important parameters used for determining the performance of tunnel boring machines (TBMs) is their penetration rate. The parameters affecting the penetration rate can be divided in two categories. The first category is the controllable parameters such as the TBM technical characteristics, and type and geometry of the tunnel, and the second one is the uncontrollable parameters s...
متن کاملMultivariate Estimation of Rock Mass Characteristics Respect to Depth Using ANFIS Based Subtractive Clustering- Khorramabad- Polezal Freeway Tunnels
Combination of Adoptive Network based Fuzzy Inference System (ANFIS) and subtractive clustering (SC) has been used for estimation of deformation modulus (Em) and rock mass strength (UCSm) considering depth of measurement. To do this, learning of the ANFIS based subtractive clustering (ANFISBSC) was performed firstly on 125 measurements of 9 variables such as rock mass strength (UCSm), deformati...
متن کاملStability analysis of support systems using a coupled FEM-DFN model (Case study: a diversion tunnel at Lorestan dam site, Iran)
Various structural discontinuities, which form a discrete fracture network, play a significant role in the failure conditions and stability of the rock masses around underground excavations. Several continuum numerical methods have been used to study the stability of underground excavations in jointed rock masses but only few of them can take into account the influence of the pre-existing natur...
متن کاملAnalysis of support pressure for stabilization of rock blocks in the Zaker tunnel
This paper presents the results of engineering geological studies of rock blocks along a road tunnel in NW Iran. The tunnel is to cross the Western Alborz Mountain Range through 530 m in length with 11.2 m span and 8 m height. Eocene tuffs and andesites crop out in whole of the tunnel route. Numerical analyses are done using, a 3D stability analysis and visualization program, called Unwedge tha...
متن کاملPrediction model of limestone rock mass quality, using seismic wave velocity (Case study: Sarvak formation in Bakhtiari dam site)
The purpose of this study was to develop a model for the estimation of rock mass classification of Sarvak limestone in the Bakhtiari dam site, south-west (SW) Iran. Q system had been used as the starting point for the rock mass classification. This method was modified for sedimentary rock mass which is known as Qsrm. Because Qsrm considers a wide range of rock mass propert...
متن کامل