Jet-printed electrodes and semiconducting oligomers for elaboration of organic thin-film transistors

نویسندگان

  • S. Sanaur
  • A. Whalley
  • B. Alameddine
  • M. Carnes
  • C. Nuckolls
چکیده

A new oligomer of bithiophene and substituted fluorene has been successfully synthesized, exhibiting good FET performance. Our results show that devices can be obtained from inkjetted OTFTs and elaborated by direct writing without any particular pre-patterning or self-alignment techniques. We have also demonstrated the possibility to fabricate inexpensive OTFTs by direct writing paving the way toward using inkjet printing as the key technology for such applications in plastic electronics. The ease of this technique allows charts a clear path to flexible electronics. 2006 Elsevier B.V. All rights reserved. PACS: 85.30. z; 72.80.Le; 81.07. b; 73.61.Ph; 85.30.Tv

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Strain sensitivity and durability in p-type and n-type organic thin-film transistors with printed silver electrodes

Mechanical flexibility and compatibility of printing processes are key advantage that organic electronic devices have over conventional inorganic devices. However, one of the major remaining issues for organic devices is insufficient mechanical durability of printed electrodes. Here we have investigated the mechanical durability of both p-type and n-type organic thin-film transistors (TFTs) wit...

متن کامل

Ultra-low voltage, organic thin film transistors fabricated on plastic substrates by a highly reproducible process

Related Articles Second-harmonic generation reveals the oxidation steps in semiconductor processing J. Appl. Phys. 111, 064504 (2012) Very low bias stress in n-type organic single-crystal transistors APL: Org. Electron. Photonics 5, 79 (2012) Very low bias stress in n-type organic single-crystal transistors Appl. Phys. Lett. 100, 133301 (2012) InGaN channel high electron mobility transistor str...

متن کامل

Screen printing as a scalable and low-cost approach for rigid and flexible thin-film transistors using separated carbon nanotubes.

Semiconducting single-wall carbon nanotubes are very promising materials in printed electronics due to their excellent mechanical and electrical property, outstanding printability, and great potential for flexible electronics. Nonetheless, developing scalable and low-cost approaches for manufacturing fully printed high-performance single-wall carbon nanotube thin-film transistors remains a majo...

متن کامل

Organic Thin Film Transistors with Polyvinylpyrrolidone / Nickel Oxide Sol-Gel Derived Nanocomposite Insulator

Polyvinylpyrrolidone  /  Nickel  oxide  (PVP/NiO)  dielectrics  were fabricated  with  sol-gel  method  using  0.2  g  of  PVP  at  different working  temperatures  of  80,  150  and  200  ºC.  Structural  properties and surface morphology of the hybrid films were investigated by X- Ray  diffraction  (XRD)  and  Scanning  Electron Microscope  (SEM) respectively. Energy dispersive X-ray spec...

متن کامل

Aerosol jet printed, low voltage, electrolyte gated carbon nanotube ring oscillators with sub-5 μs stage delays.

A central challenge for printed electronics is to achieve high operating frequencies (short transistor switching times) at low supply biases compatible with thin film batteries. In this report, we demonstrate partially printed five-stage ring oscillators with >20 kHz operating frequencies and stage delays <5 μs at supply voltages below 3 V. The fastest ring oscillator achieved 1.2 μs delay time...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006