A Review on Detonation Gun Sprayed Coatings
نویسندگان
چکیده
Materials are precious resources. Different methods are employed to protect the material from degradation. Thermal spraying is one of the most effective method to protect the material from wear, high temperature corrosion, stresses and erosion, thus increasing the life of material in use. Detonation gun spraying is one of the thermal spraying techniques known for providing hard, wear resistant and dense microstructured coatings. This paper summarizes the results of previous research done by various authors on different coatings done by detonation gun spraying technique.
منابع مشابه
Corrosion Behavior of Detonation Gun Sprayed Fe-Al Type Intermetallic Coating
The detonation gun sprayed Fe-Al type coatings as an alternative for austenitic valve steel, were investigated using two different methods of testing corrosion resistance. High temperature, 10-hour isothermal oxidation experiments at 550, 750, 950 and 1100 °C show differences in the oxidation behavior of Fe-Al type coatings under air atmosphere. The oxide layer ensures satisfying oxidation resi...
متن کاملTribological Investigation of Detonation Sprayed Ni - Cr And Al 2 O 3 13 Tio 2 Coatings On Grey Cast Iron To Enhance Its Wear Resistance
This paper is concerned with the investigation of the capability of Detonation sprayed Ni-Cr And Al2O3 13TiO2 coatings to improve the tribological and mechanical properties of grey cast iron. The present study describes and compares the mechanical and tribological properties of NiCr and Al2O3 13TiO2 D-Sprayed coatings deposited on two different substrates (GI250 and GIHC) Experiments using a tr...
متن کاملSurface Wear Characterization Of Thermally Sprayed Coating Of Al2O3-13TiO2 on M.S Substrate
Wear of the surface is the major problem of all materials. This wear can be of many types and there can be several methods of reducing wear. Coating on the surface of material is one of them. On M.S substrate, thermal spray coating is done using Detonation spray gun and coating powders used is a mixture of oxides (Al2O3-13TiO2). The thermal-sprayed coatings are characterized by SEM, EDS analyse...
متن کاملThe Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings
Improvement of thermally sprayed coating properties by microstructure modification has been considered as a significant solution. Therefore, in this research the effect of dissolved oxygen content and post heat treatment on the formation and distribution of secondary phase particles, particularly in nano-scale in the coatings during spraying and after that were studied. Ni-5 wt% Al powders were...
متن کاملSolid Particle Erosion of Thermal Sprayed Coatings
Solid particle erosion is an important material degradation mechanism. Although various methods of coating are tried and used for protection against erosion, thermal sprayed coating for such purpose is the most widely used method. In this chapter, evolution of thermal sprayed coating, erosion testing methods, and erosive wear of thermal sprayed coatings are discussed extensively with emphasis o...
متن کامل