Fault Tolerant Design for Magnetic Memories
نویسندگان
چکیده
This study presents a Fault Tolerant memory cores based on the property of Component Reusability, a method for Fault Tolerance for content addressable memories. The memories used in the design are 256, 512, 1024 and 2048 bytes. The fault is injected into the circuitry operation by using Automatic Test Pattern Generators (ATPGs). The design has been implemented in Cadence 90 nm technology and tested with Fault Injection Circuits and ATPG effectiveness was found out to be 100% at a frequency of 500 MHZ.
منابع مشابه
Fault Tolerant Reversible QCA Design using TMR and Fault Detecting by a Comparator Circuit
Quantum-dot Cellular Automata (QCA) is an emerging and promising technology that provides significant improvements over CMOS. Recently QCA has been advocated as an applicant for implementing reversible circuits. However QCA, like other Nanotechnologies, suffers from a high fault rate. The main purpose of this paper is to develop a fault tolerant model of QCA circuits by redundancy in hardware a...
متن کاملA New Design of Fault Tolerant Comparator
In this paper we have presented a new design of fault tolerant comparator with a fault free hot spare. The aim of this design is to achieve a low overhead of time and area in fault tolerant comparators. We have used hot standby technique to normal operation of the system without interrupting and dynamic recovery method in fault detection and correction. The circuit is divided to smaller modules...
متن کاملAnalyzing and Exploring Fault-tolerant Distributed Memories for NoCs
Advances in technology scaling increasingly make Network-on-Chips (NoCs) more susceptible to failures that cause various reliability challenges. With increasing area occupied by different on-chip memories, strategies for maintaining faulttolerance of distributed on-chip memories become a major design challenge. We propose a system-level design methodology for scalable fault-tolerance of distrib...
متن کاملFault Tolerant Reversible QCA Design using TMR and Fault Detecting by a Comparator Circuit
Quantum-dot Cellular Automata (QCA) is an emerging and promising technology that provides significant improvements over CMOS. Recently QCA has been advocated as an applicant for implementing reversible circuits. However QCA, like other Nanotechnologies, suffers from a high fault rate. The main purpose of this paper is to develop a fault tolerant model of QCA circuits by redundancy in hardware a...
متن کاملFault-tolerant adder design in quantum-dot cellular automata
Quantum-dot cellular automata (QCA) are an emerging technology and a possible alternative for faster speed, smaller size, and low power consumption than semiconductor transistor based technologies. Previously, adder designs based on conventional designs were examined for implementation with QCA technology. This paper utilizes the QCA characteristics to design a fault-tolerant adder that is more...
متن کامل