Stabilisation of Martensite in Copper Based Shape Memory Alloys

نویسندگان

  • M. Chandrasekaran
  • E. Cesari
  • J. Wolska
  • I. Hurtado
  • R. Stalmans
  • J. Dutkiewicz
چکیده

The experimental facts on the stabilisation of martensite in copper base shape memory alloys, of interest to the scientific investigator and the practical alloy processor and user are reported. Factors that have an influence on stabilisation are considered in this respect. The mechanisms proposed in the literature to explain stabilisation are critically examined.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

ON THE INHIBITION OF STABILISATION OF MARTENSITE IN Cu-Zn-AI ALLOYS

A shape memory device, and thus the alloy, when not operating is generally held in the martensitic condition. Also the shape memory effect depends on the retransformation of the martensite to the parent phase (i). Use of an alloy in a temperature controlling device, therefore, demands reliability and reproducibility of this retransformation temperature with shape memory cycles and more particul...

متن کامل

Theoretical modelling of the effect of plasticity on reverse transformation in superelastic shape memory alloys

Stimulated by recent experimental results on superelastic NiTi shape memory alloy, a theoretical study is carried out to quantify the effect of plasticity on stress-induced martensite transformation, using a constitutive model that combines phase transformation and plasticity. A constraint equation is introduced to quantify the phenomenon of the stabilisation of plasticity on stress-induced mar...

متن کامل

Mechanism of two Way Shape Memory Effect Obtained by Stabilised Stress Induced Martensite

Two Way Shape Memory Effect (TWSME) involves thermomechanical routines which produce some plastic deformation or complex dislocation arrays during the training procedure. The results of TWSME obtained by these thermomechanical training routines are not as good as would be expected because new dislocations are generated during thermal cycling. These dislocations may interact with those that prov...

متن کامل

Influence of Alfa’ Martensite on Shape Memory in Fe-Mn-Based Alloys

An Fe-16MndSi alloy exhibits a good one-way and a little two-way shape memories by the stress induced y + E martensitic transformation and its reversion on heating and cyclic thermal y 2 E transformations, respectively. An intrusion of small amount of a' martensite at the initial shape change is not found to deteriorate the one-way memory and rather enhance the two-way memory. The two Fe-Mn-C a...

متن کامل

Shape Memory Alloys

THE TERM SHAPE MEMORY ALLOYS (SMA) is applied to that group of metallic materials that demonstrate the ability to return to some previously defined shape or size when subjected to the appropriate thermal procedure. Generally, these materials can be plastically deformed at some relatively low temperature, and upon exposure to some higher temperature will return to their shape prior to the deform...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016