Effects of Orthokin, Sensikin and Persica mouth rinses on the force degradation of elastic chains and NiTi coil springs

نویسندگان

  • Zahra Javanmardi
  • Parisa Salehi
چکیده

Background. Elastomeric chains and NiTi coil springs are two major traction aids in orthodontic tooth movements. Force degradation occurs over time in both groups, with higher percentages in elastic chains. The effects of environmental factors and some mouth rinses on this force decay have been previously studied. No study has been performed to evaluate the effect of current popular mouth rinses such as Orthokin, Sensikin and Persica on this force degradation. Methods . Forty pieces of elastic chains consisting of 5 loops (Ortho Technology, USA) and 40 NiTi closed coil springs (3M Unitek, Germany) were divided into 4 groups: control (artificial saliva), Orthokin mouthwash, Sensikin mouthwash and Persica mouthwash. All the groups were kept in an incubator at 37°C for 3 weeks. In the test groups, the samples were immersed in mouthwash twice a day. Force degradation was measured at 5 time intervals: baseline, 1 hour, 24 hours, 1 week and 3 weeks, using a digital force gauge. Repeated-measures ANOVA and one-way ANOVA were used for statistical analysis. Results. Force decay occurred over time in both elastic chainand coil spring groups. In elastic chain group, after 3 weeks, Orthokin mouth rinse had significantly lower force degradation compared to other groups (P < 0.05) and in coil spring group there were no statistically significant differences in force degradation after 3 weeks between the subgroups (P > 0.05). Conclusion. Based the results of this study, these three mouthwashes did not increase the force degradation of orthodontic traction aids under study.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An evaluation of the transition temperature range of super-elastic orthodontic NiTi springs using differential scanning calorimetry.

Differential scanning calorimetry (DSC) was used to determine the transition temperature ranges (TTR) of four types of super-elastic orthodontic nickel-titanium coil springs (Sentalloy). A knowledge of the TTR provides information on the temperature at which a NiTi wire or spring can assume superelastic properties and when this quality disappears. The spring types in this study can be distingui...

متن کامل

Effect of Recycling and Autoclave Sterilization on the Unloading Forces of NiTi Closed-Coil Springs: An In Vitro Study

STATEMENT OF PROBLEM Clinicians use the NiTi coil springs frequently for its appropriate mechanical properties. PURPOSE The aim of this study was to determine the effect of recycling and autoclave sterilization on the unloading forces of NiTi closed coil springs. MATERIALS AND METHOD Fourteen NiTi closed coil spring with the length of 9mm were selected. Each coil was stretched to a peak ext...

متن کامل

Effect of temperature on the orthodontic clinical applications of niti closed-coil springs

UNLABELLED NiTi spring coils were used to obtain large deformation under a constant force. The device consists on a NiTi coil spring, superelastic at body temperature, in order to have a stress plateau during the austenitic retransformation during the unloading. The temperature variations induced changes in the spring force. OBJECTIVES The aim of this study is to investigate the effect of the...

متن کامل

Open-Coil Retraction Spring

Sliding mechanic has become a popular method for space closure with developments in preadjusted edgewise appliance. Furthermore, various space closing auxiliaries have been developed and evaluated extensively for their clinical efficiency. Their effectiveness enhanced with optimum force magnitude and low-load deflection rate (LDR)/force decay. With the advent of NiTi springs in orthodontics, LD...

متن کامل

Comparing the elastomeric behavior and force degradation pattern between different orthodontic elastomeric chains

Background and Aims: Elastomeric chains are known as a current device with the purpose of dental movement in orthodontic treatments. The aim of this study was to compare the elastomeric behavior and force degradation rate between different elastomeric chains existing in Iran in different time durations. Materials and Methods: 11 different elastomeric chains used in this study were: Class One, ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 10  شماره 

صفحات  -

تاریخ انتشار 2016