Overview on Experiments On ITERlike Antenna On JET And ICRF Antenna Design For ITER
نویسندگان
چکیده
Following an overview of the ITER Ion Cyclotron Resonance Frequency (ICRF) system, the JET ITER-like antenna (ILA) will be described. The ILA was designed to test the following ITER issues: (a) reliable operation at power densities of order 8MW/m^ at voltages up to 45kV using a close-packed array of straps; (b) powering through ELMs using an internal (invacuum) conjugate-T junction; (c) protection from arcing in a conjugate-T configuration, using both existing and novel systems; and (d) resilience to disruption forces. ITER-relevant results have been achieved: operation at high coupled power density; control of the antenna matching elements in the presence of high inter-strap coupling, use of four conjugate-T systems (as would be used in ITER, should a conjugate-T approach be used); operation with RF voltages on the antenna structures up to 42kV; achievement of ELM tolerance with a conjugate-T configuration by operating at 3 0 real impedance at the conjugate-T point; and validation of arc detection systems on conjugate-T configurations in ELMy H-mode plasmas. The impact of these results on the predicted performance and design of the ITER antenna will be reviewed. In particular, the implications of the RF coupling measured on JET will be discussed. 1 See the Appendix of F. Romanelli et al., Fusion Energy Conference 2008 (Proc. 22nd Int. FEC Geneva, 2008) IAEA, (2008) CPW&l, Radio Frequency Power in Plasmas edited by V. Bobkov and J.-M. Noterdaeme © 2009 Amencanlnstitute of Physics 978-0-7354-0753-4/09/$25.00
منابع مشابه
Critical Problems in Plasma Heating/CD in large fusion devices and ITER
We identify critical problems in Plasma Heating and Current Drive plasma-wave interaction physics and antennae concepts/technology for large fusion devices, including tokamaks, stellarators, mirror traps and constructing ITER for all major methods like ECRF, ICRF, NBI and LHH. Analysis is based on experiments in large machines and modelling with 3D ICRF and ECRF recently developed full wave PST...
متن کاملLatest Achievements of the JET ICRF Systems in View of ITER
During the 2008-2009 JET campaigns, ICRF power was coupled to ELMy H-mode plasmas using 2 distinctly different antenna systems. The newly added ITER-like ICRF antenna aimed in priority at the validation for ITER of high power density load resilient antenna concepts while the A2 antennas were equipped with 2 different load resilient transmission line circuits in order to increase the power coupl...
متن کاملExpanding the operating space of ICRF on JET with a view to ITER
This paper reports on ITER-relevant ICRF physics investigated on JET in 2003 and early 2004. Minority heating of helium three in hydrogen plasmas (He)H was systematically explored by varying the He concentration and the toroidal phasing of the antenna arrays. The best heating performance (a maximum electron temperature of 6.2keV with 5MW of ICRF power) was obtained with a preferential wave laun...
متن کاملICRF Antenna Operation with Full W-wall in ASDEX Upgrade
Abstract. The compatibility of ICRF (Ion Cyclotron Range of Frequencies) antenna operation with high-Z plasma facing components (PFCs), needs improvement to keep ICRF as a good candidate for heating and current drive system in a fusion reactor. ASDEX Upgrade (AUG) with its tungsten (W) first wall and ICRF system allows to study ways to do this. A noticeable improvement of the ICRF operation wit...
متن کاملAlcator C-Mod Ion Cyclotron Antenna Performance
One of the keys to successful ion cyclotron range of frequency (ICRF) heating is antenna performance. In Alcator C-Mod, we have investigated the compatibility of high power ICRF antennas with high performance plasmas and all high-Z plasma facing components, to provide operational information for future devices such as ITER. Boronization appears to be critical to control plasma radiation but it ...
متن کامل