Proposal of an empirical formula for the austenitising temperature
نویسندگان
چکیده
A formula is proposed to calculate the chemical austenitising temperature derived by means of a neural network model. A wide range of compositions were used, allowing to predict changes of tendency in the slopes of the austenitisation temperature, consistent with the existence of a eutectoid composition.
منابع مشابه
Effect of austenitising and deformation temperatures on dynamic recrystallisation in Nb-Ti microalloyed steel
An investigation into influence of the austenitising temperature and the austenite deformation temperature on Nb precipitation and recrystallisation kinetics was carried out for a steel containing 0.081C-0.021Ti-0.064Nb (wt. %). The austenite grain structure was correlated to the dispersive properties of Nb atom clustering and precipitation. Irrespective of the austenitising temperature, deform...
متن کاملEffect of Austenitising Temperature on Mechanical Properties of Nanostructured Bainitic Steel
Nanostructured bainite was obtained in high-carbon Si-Al-rich steel by low-temperature (220-260 °C) isothermal transformation after austenitisation at different temperatures (900 °C, 1000 °C, and 1150 °C). Improved strength-ductility-toughness balance was achieved in the nanostructured bainitic steel austenitised at low temperatures (900 °C and 1000 °C). Increasing the austenitising temperature...
متن کاملThe Bainitic Phase Transformation in Aluminium Containing Ductile Irons after Short Time of Austempering
The influence of aluminium on the microstructure of austempered ductile cast iron (ADI) has been studied. A number of irons of different compositions have been made by green sand casting and gravity die casting of appropriate design to provide the experimental materials. Austenitising was carried out at different temperatures and holding times for a variety of experimental irons to achieve suff...
متن کاملA Proposal of a Microcredit Granting Model for the Microfinance Associations in Tunisia
This article is devoted to look at how the factors micro-loan risks in microfinance are related to the micro-borrowers. In this regard, the present analysis involves the using of a set representative and fundamental variables in our research. The study basically use the socio-economic and socio-demographic features specific to the micro-borrowers, which are expected to affect the repayment dela...
متن کاملThe new empirical formula to estimate the uniaxial compressive strength of limestone; south west of Tehran-Iran, as a case study
In many rock engineering projects, accurate identification of rock strength properties is very important. Uniaxial compressive strength is one of the most important features to describe the resistive behavior of rocks which is used as an important parameter in the design of structures especially underground openings. Determination of this parameter using direct methods, including uniaxial compr...
متن کامل