Measurement of Multi-Port S-Parameters using Four-Port Network Analyzer

نویسندگان

  • Jongmin Kim
  • Duc Long Luong
  • Wansoo Nah
  • SoYoung Kim
  • JONGMIN KIM
چکیده

An efficient measurement methodology is proposed to construct the scattering parameters of a multi-port device using a four-port vector network analyzer (VNA) without the external un-terminated ports. By using the four-port VNA, the reflected waves from the un-terminated ports could be minimized. The proposed method significantly enhances the accuracy of the S-parameters with less number of measurements compared to the results of classical renormalization technique which uses twoport VNA. The proposed method is validated from the measured data with the coupled 8-port micro-strip

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Selection of Specific S-parameters in Multiport Measurement for the Renormalization Technique using Four-port VNA

This paper presents an algorithm to characterize scattering parameters of multi-port device with a four-port Vector Network Analyzer (VNA). By employing the renormalization of scattering matrices with different reference impedances at ports, data obtained from multi-port configuration measurements can be synthesized to build the full scattering matrix of the device-under-test (DUT). Although th...

متن کامل

The Analysis and Measurement for Three-port Scatter Parameters of Substructure in Multimode Feed Network

In opinion of substructure cascade, multimode feed network is composed of impedance transforming substructure and isolating substructure. Starting from the characteristic of the substructure in multimode feed network, a method of measurement for its three-port scatter parameters of substructure is presented, based on the applying of the available two-port vector network analyzer (VNA), consider...

متن کامل

Determination of the Complex Residual Errors of a Calibrated One- Port Vector Network Analyzer Using the Ripple Test

This article present a new method of accuracy verification of calibrated one-port vector network analyzers based on the least mean square algorithm. The method is of particular interest for significantly limited frequency ranges as well as for cost-effective S-parameter measurement systems where the use of conventional ripple test may be impractical and/or relatively expensive. Experimental stu...

متن کامل

Mixed-Mode S-Parameter Characterization of Differential Structures

Combined differential-mode and common-mode (mixedmode) scattering parameters (s-parameters) are well adapted to accurate measurements of linear networks at RF and microwave frequencies. The relationships between standard s-parameters with two-port vector network analyzer (VNA) and mixed-mode s-parameters with four-port VNA are derived in this paper. An example differential structure was measure...

متن کامل

Measuring Capacitor Parameters Using Vector Network Analyzers

Abstract—Vector network analyzer (VNA) is versatile measuring equipment which is primarily used for two-port device S parameters measurements. This paper addresses measurement of capacitor parameters using VNA in broad frequency range. The main attention is focused on the measurement accuracy of capacitors parameters using VNA and proper de-embedding of an experimental setup parasitics to get a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013