Simultaneous current, force and dissipation measurements on the Si(111) 7×7 surface with an optimized qPlus AFM/STM technique
نویسندگان
چکیده
We present the results of simultaneous scanning-tunneling and frequency-modulated dynamic atomic force microscopy measurements with a qPlus setup. The qPlus sensor is a purely electrical sensor based on a quartz tuning fork. If both the tunneling current and the force signal are to be measured at the tip, a cross-talk of the tunneling current with the force signal can easily occur. The origin and general features of the capacitive cross-talk will be discussed in detail in this contribution. Furthermore, we describe an experimental setup that improves the level of decoupling between the tunneling-current and the deflection signal. The efficiency of this experimental setup is demonstrated through topography and site-specific force/tunneling-spectroscopy measurements on the Si(111) 7×7 surface. The results show an excellent agreement with previously reported data measured by optical interferometric deflection.
منابع مشابه
Formation of linearly linked Fe clusters on Si(111)-7 × 7-C2H5OH surface
UNLABELLED The Fe atoms were deposited on the Si(111)-7 × 7 surface, which has been saturated with the C2H5OH molecules. Then, the Fe clusters were formed on Si(111)-7 × 7-C2H5OH surface and in situ observed by the scanning tunneling microscopy (STM). The STM images showed that with the increase of Fe clusters, the size of clusters was about 5 nm and they self-assembled in straightly linked cha...
متن کاملEffect of the tip state during qPlus noncontact atomic force microscopy of Si(100) at 5 K: Probing the probe
BACKGROUND Noncontact atomic force microscopy (NC-AFM) now regularly produces atomic-resolution images on a wide range of surfaces, and has demonstrated the capability for atomic manipulation solely using chemical forces. Nonetheless, the role of the tip apex in both imaging and manipulation remains poorly understood and is an active area of research both experimentally and theoretically. Recen...
متن کاملSimulated structure and imaging of NTCDI on Si(1 1 1)-7 × 7 : a combined STM, NC-AFM and DFT study.
The adsorption of naphthalene tetracarboxylic diimide (NTCDI) on Si(1 1 1)-7 × 7 is investigated through a combination of scanning tunnelling microscopy (STM), noncontact atomic force microscopy (NC-AFM) and density functional theory (DFT) calculations. We show that NTCDI adopts multiple planar adsorption geometries on the Si(1 1 1)-7 × 7 surface which can be imaged with intramolecular bond res...
متن کاملAtomic Structures of Silicene Layers Grown on Ag(111): Scanning Tunneling Microscopy and Noncontact Atomic Force Microscopy Observations
Silicene, the considered equivalent of graphene for silicon, has been recently synthesized on Ag(111) surfaces. Following the tremendous success of graphene, silicene might further widen the horizon of two-dimensional materials with new allotropes artificially created. Due to stronger spin-orbit coupling, lower group symmetry and different chemistry compared to graphene, silicene presents many ...
متن کاملElectron scattering in scanning probe microscopy experiments
It has been shown that electron transitions, as measured in a scanning tunnelling microscope, are related to chemical interactions in a tunnelling barrier. Here, we show that the shape and apparent height of subatomic features in both, measurements of the attractive forces in an atomic force microscope, and measurements of the tunneling current between the Si(111) surface and an oscillating can...
متن کامل