Nonanomalous Electrodeposition of Zinc-Iron Alloys in an Acidic Zinc Chloride-1-ethyl-3-methylimidazolium Chloride Ionic Liquid

نویسندگان

  • Jing-Fang Huang
  • I-Wen Sun
چکیده

The electrodeposition of iron and Zn-Fe alloys on polycrystalline nickel was investigated in the 40.0-60.0 mol % zinc chloride1-ethyl-3-methylimidazolium chloride ionic liquid containing iron~II! at 90°C. Iron~II! was electrochemically reduced to iron metal before the reduction of zinc~II! to zinc metal, and anomalous codeposition of Zn-Fe did not occur in this ionic liquid. Underpotential deposition of zinc on iron was observed prior to the electrodeposition of bulk zinc. Dimensionless chronoamperometric current/time transients for the underpotential deposition of zinc on iron were in good accord with the theoretical transients for the two-dimensional nucleation and/or growth of the nuclei. Zn-Fe alloys could be prepared in the potential range of the underpotential of zinc on iron or the potential range where bulk deposition of zinc occurred. Energy-dispersive spectroscopy data indicated that the composition of the Zn-Fe alloys was dependent upon the deposition potential and the iron~II! concentration in the plating solution. The morphologies of the Zn-Fe codeposits were examined by scanning electron microscopy. © 2003 The Electrochemical Society. @DOI: 10.1149/1.1628235# All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Conductivity, Electrodeposition and Magnetic Property of Cobalt(II) and Dysprosium Chloride in Zinc Chloride-1-Ethyl-3-Methylimidazolium Chloride Room Temperature Molten Salt

Electric conductivity of the molten zinc chloride-1-ethyl-3-methylimidazolium chloride phases has been measured by a computerized system using the d.c. four-probes method. The sequence of the conductivities for the different component melts is ZnCl2-EMIC > ZnCl2-EMIC-CoCl2 > ZnCl2EMIC-DyCl3 > ZnCl2-EMIC-CoCl2-DyCl3. The results may be explained in terms of the viscosity increase due to the comp...

متن کامل

Electrochemical and spectroscopic study of Zn(ii) coordination and Zn electrodeposition in three ionic liquids with the trifluoromethylsulfonate anion, different imidazolium ions and their mixtures with water.

In this paper we report on the use of three ionic liquids, 1-methylimidazolium trifluoromethylsulfonate ([MIm]TfO), 1-ethyl-3-methylimidazolium trifluoromethylsulfonate ([EMIm]TfO) and 1-ethyl-2,3-dimethylimidazolium trifluoromethylsulfonate ([EMMIm]TfO) containing zinc trifluoromethylsulfonate as electrolytes for zinc electrodeposition. By varying the cations from [MIm](+)via [EMIm](+) to [EMM...

متن کامل

1-(1-Propylsulfonic)-3-methylimidazolium chloride Brønsted acidic ionic liquid catalyzed one-pot synthesis of 14-aryl-14H-dibenzo[a,j]xanthene derivatives under solvent-free conditions

A rapid, green and efficient method for the synthesis of 14-aryl-14H-dibenzo[a,j]xanthene derivatives through a one-pot condensation of 2-naphthol with various aromatic aldehydes in the presences of several acidic ionic liquids including [PSMIM]Cl, [BMIM]HSO4, [BMIM]Cl, [BMIM]Br, and [BMIM]BF4 as organocatalysts and task-specific acidic ionic liquids (AILs) under solvent-free conditions is desc...

متن کامل

1-(1-Propylsulfonic)-3-methylimidazolium chloride Brønsted acidic ionic liquid catalyzed one-pot synthesis of 14-aryl-14H-dibenzo[a,j]xanthene derivatives under solvent-free conditions

A rapid, green and efficient method for the synthesis of 14-aryl-14H-dibenzo[a,j]xanthene derivatives through a one-pot condensation of 2-naphthol with various aromatic aldehydes in the presences of several acidic ionic liquids including [PSMIM]Cl, [BMIM]HSO4, [BMIM]Cl, [BMIM]Br, and [BMIM]BF4 as organocatalysts and task-specific acidic ionic liquids (AILs) under solvent-free conditions is desc...

متن کامل

The electrodeposition of zinc alloys from ionic liquid electrolytes

Electrodeposited zinc alloys have long been recognised as effective barrier and sacrificial coatings for ferrous substrates. The effect of alloying zinc with, in the main, more noble metals, has produced finishes of higher corrosion resistance than simply electrodeposited zinc. In this manner zinc alloys such as zinc-nickel, zinc-cobalt and zinc-iron are routinely electrodeposited on an industr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003